What Spindle Will Work for Trailer Hub Assembly with L68149 Inner and L44649 Outer Bearings
Question:
What part # spindle do I need to match up with part #84550BX ?
asked by: Randy S
Expert Reply:
The Trailer Hub Assembly # 84550BX that you referenced will use # L68149 as the inner bearing and # L44649 as the outer bearing. These are the inner and outer bearings used by a # 84 spindle.
We offer the following spindles:
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (11-1/4" OAL) # TRU84FR [R2061-284]
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter (9" OAL) # TRU74FR [R20384EZ]
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter (8-1/4" OAL) # TRU64FR [R20484]
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter (8-1/4" OAL) # TRU24FR [R40484]
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide (8-1/4" OAL) # TRU47FR [SP20484]
Out of these spindles, the correct one for you will depend on if you need a round or square spindle, a spindle that is an EZ Lube spindle, and what size stub the spindle needs for your application. The most popular spindle out of these is part # TRU84FR.
Products Referenced in This Question
Replacement Trailer Hub Bearing - L44649
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.063 Inch I.D.
- Bearing L44649
- Race L44610
- 3500 lbs Axle
- etrailer
more information >
Replacement Trailer Hub Bearing - L68149
- Trailer Bearings Races Seals Caps
- Bearings
- Standard Bearings
- 1.378 Inch I.D.
- Bearing L68149
- Race L68111
- 3500 lbs Axle
- etrailer
more information >
#84 Spindle for 3,500-lb Trailer Axles - 2" Diameter
- Trailer Spindles
- Standard Spindle
- 2 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
#84 E-Z Lube Spindle w/ Brake Flange for 3,500-lb Trailer Axle - 1-3/4" Diameter
- Trailer Spindles
- EZ Lube Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
#84 Spindle for 3,500-lb Trailer Axles - 1-3/4" Diameter
- Trailer Spindles
- Standard Spindle
- 1-3/4 Inch Diameter
- Round
- For 3500 lb Axle
- TruRyde
more information >
Product Page this Question was Asked From
Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 5 - Pre-Greased
- Trailer Hubs and Drums
- Hub
- Pre-Greased
- Standard
- L68149
- L44649
- For 3500 lbs Axles
- 5 on 5 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- Redline
more information >
Continue Researching
- Article: Most Popular Wheel Bearings
- Shop: Kodiak Disc Brake Kit - 10" Rotor - 5 on 4-1/2 - Dacromet and Stainless Steel - 3,500 lbs
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 3.5K Trailer Axles - 25-1/8" - Dacromet
- Shop: MORryde Suspension Upgrade Kit for Tandem Axle Trailers - 3-1/8" Long Shackle Straps
- Q&A: Replacement Trailer Leaf Spring for 2,700 lb Axle 26-1/4 inch In Length
- Shop: etrailer Rust-Resistant 4-Leaf Double Eye Spring for 5K Trailer Axles - 25-1/4" Long - Dacromet
- Shop: Tandem-Axle Trailer Hanger Kit for Double-Eye Springs - 2-1/2" Front/Rear, 4-1/2" Center
- Shop: 4-Leaf Double-Eye Spring for 5,000-lb Trailer Axles - 25-1/4" Long
- Q&A: Tie Down Model 70 Surge Brake Actuator Replacement Recommendation
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: How Close to Trailer Weight Should Capacity of Trailer Leaf Spring Be
- Q&A: Replaced Leaf Springs On Tandem Axle Boat Trailer And The Rear Springs Are Tilting Rear Axle Forward
- Q&A: Should Leaf Spring Capacity Match Trailer Weight or Axle Weight for Best Ride Comfort
- Q&A: How to Select the Correct Leaf Spring Size for a Tandem Axle Trailer with Slipper Springs
- Search Results: titan model 10 master cylinder
- Search Results: 80043a
- Search Results: 58846
- Search Results: titan model 10 actuator
- Search Results: 14125a
- Search Results: asr35hds02
- Search Results: spindle