Installation Place for Brake Controller Adapter 3016 on a 2015 Chevrolet Silverado 2500

Question

Question:

i got distracted while changing harnesses, DOOOOOH! which port on the truck do i use? wiring kit for a 2015 chevy 2500

asked by: Paul

0

Expert Reply:

Don't worry, I can help.

You will want to plug the brake controller plug # 3016 into the junction box on your 2015 Chevrolet Silverado 2500 just below the blue and white plug to the very left of the junction box.

I have linked two pictures to this page pointing out the socket area for you to better see.

expert reply by: Jackie C

0

click to enlarge

Answer 1

If your 2022 Chevrolet Tahoe does not have the factory tow package then the plug may not be there. If this is the case you would need to hardwire in a brake controller. If your Tahoe does have the tow package then the plug will be under the dash. The…

view full answer...

Answer 2

Since your 2022 Chevy Tahoe has factory brake controller wiring and not a port to plug a connector into you'd only need a brake controller like the Curt Assure Trailer Brake Controller #C49UR that you referenced and you'd just need to wire…

view full answer...

Answer 3

Yes, to control the brakes on your trailer you have to have a brake controller. Without one there's no safe way to activate the trailer brakes. So for your 2017 Chevy Silverado I would recommend the Prodigy P3 Brake Controller part #90195. This…

view full answer...

Answer 4

Out of the available front mount hitches that fit your 2017 Chevrolet Silverado 1500 I recommend the Draw-Tite #65064. In all honesty it has the same weight ratings as the Curt #C31069 but it is a little more popular and has more reviews. Either one…

view full answer...

Answer 5

The Curt Front Mount Trailer Hitch Receiver #C31069 provides the most ground clearance out of the three available for your 2017 Chevy Silverado 1500. To give you a better idea of how low each hitch would sit once bolted to your frame I have attached…

view full answer...

Answer 6

Installing the P3 brake controller #90195 on your 2015 Chevy Silverado 2500 with factory integrated controller will actually be very simple. What you will do is use harness #3016 which plugs into a port on the truck already. But you will need to…

view full answer...

Answer 7

The factory brake controller port on your 2018 Chevy Silverado 1500 is in your vehicle's junction box underneath the dash, to the left of the steering column, just above the carpeting. If you take a look at the accompanying photo you can see…

view full answer...

Answer 8

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 9

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Hey Travis, congrats on the new 2024 Jayco Flight 284BHS! Your travel trailer looks to have a GVWR of 7,950 lbs so I recommend going with the Equal-i-zer Weight Distribution w/ 4-Point Sway Control #EQ37121ET and pairing it with the Shank…

view full answer...

Answer 12

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...