Recommended Weight Distribution for a 16 Foot Haulmark Cargo Trailer

Question

Question:

Im running a 16x7 haulmark cargo trailer 7000gvw max tongue ive seen is about 850. currently towing with a 15 ram 3500 SRW and a weigh safe 10-25 with a 2 5/16 ball and I run it with 8 inches of drop for a loaded trailer of about 6500#. is their a weight dist system available with that much drop and would it be a benefit for towing this trailer? What specific parts would you recommend?

asked by: Michael S

0

Expert Reply:

I have just the weight distribution for you and your 16 x 7 Haulmark Cargo Trailer.

For the weighs you mentioned the 10,000lbs Equal-i-zer system # EQ37101ET will work great for your 2015 Ram 3500 SRW and 2-5/16 inch coupler on your Haulmark. This system has a 4-point sway control system that doesn't include a shank already so that you can get the one you need. The Equal-i-zer shank I recommend for you is the # EQ90-02-4400 which has a 9 inch drop.

The only optional add-on you may be interested in is the special thin-walled socket which is special to the Equal-I-zer hitch ball installation and removal # EQ70-00-4800.

Typically you would likely benefit from a weight distribution system if:
•Your trailer weight (GTW) is more than 50 percent of your vehicle's weight (GVWR)
•The rear of your tow vehicle sags when the trailer is hooked up
•You experience trailer sway
•Your tow vehicle's headlights point upward
•You find it difficult to steer or stop your rig
•You want to tow to the highest capacity allowed by your vehicle's trailer hitch

I have linked all the products mentioned above as well as a review video of the Equal-I-zer weight distribution for you to check out.

expert reply by: Jackie C

0

Answer 1

Thank you for the photo of your v-nose enclosed trailer for which you are looking for a weight distribution/sway control (WD/SC) system. Since you have limited access to the trailer frame, about 15-inches based on your photo, I suggest you check…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

Hi Robin, Yes, you can absolutely use the 2" Equal-i-zer Weight Distribution Shank #EQ90-02-4600 with the Blue Ox SwayPro Weight Distribution #BXW2000. The hole spacing on the Equal-i-zer shank is the same as the Blue Ox shank which is why they…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The round or trunnion bars refers to the end of the spring bars. Round bars are typically designed for lighter applications, are a bit harder to install and are usually priced lower than trunnion bars. Trunnion bars are typically designed to be used…

view full answer...

Answer 6

What tire size do you have now? What is your wheel bolt pattern?

view full answer...

Answer 7

The Husky Center Line Weight Distribution with Sway Control 32217 is for 600 lb to 800 lb total tongue weight capacities (the tongue weight of your fully loaded and ready to go trailer plus the weight of any cargo behind the rear axle of your tow…

view full answer...

Answer 8

Both round and trunnion bar systems are equally as effective, but a round bar system won't have as much ground clearance under it as a trunnion bar system. This is because the bars attach to the weight distribution head from underneath. If your…

view full answer...

Answer 9

You can have more than one iPhone "connected" to the Lippert Tire Linc system part #LC37VR but only one can be used at a time. So basically you or your wife could have their phone connected but if you needed to switch between the two phones…

view full answer...

Answer 10

I recommend the Fastway e2 Weight Distribution #FA92-00-0800 for your 5,500lb travel trailer with 492lbs of tongue weight. This hitch is rated for trailers weighing up to 8,000lbs with between 400-800lbs of tongue weight. I prefer this hitch as it…

view full answer...

Answer 11

To determine which hitch extension you will need for pulling your trailer behind your 2022 Ford F-350 with the factory 3" receiver while you are carrying a truck bed camper you will need to measure the distance needed for the amount the camper…

view full answer...