Parts Needed to Install Thule Aeroblade Crossbars on a Truck Camper Shell

Question

Question:

Hello! Ive purchased 53 inch Aero bars to mount on my camper shell, what bases/towers do you recommend if Im mounting them directly to my Snugtop? Thank you!

asked by: Steve E

0

Expert Reply:

To install your 53 inch Thule Aeroblade bars part # TH711420 on your camper shell will require the tracks part # THTB60 that you referenced, the Podium Aero Feet part # TH460R and fit kit part # THKIT3101.

expert reply by: Jameson C

0

Answer 1

Unfortunately, I have no way of seeing what is in your cart. However, for your 2021 Ram 1500, I recommend the Thule WingBar Evo Crossbars #TH711520 with the clamp feet #TH710501 and fit kit #TH145199. These crossbars have a maximum load capacity of…

view full answer...

Answer 2

We do have a camper shell ladder rack you can use with your Leer camper shell on your 2007 Toyota Tundra. take a look at the Thule TracRac CapRac #TH29200XT. This rack includes everything so it is ready to install. The load stops are also included.…

view full answer...

Answer 3

To determine if you can use the 60" WingBar Evo Crossbars, part #TH711500 or part #TH711520, will fit on your 2015 Jeep Grand Cherokee you first need to measure the center to center distance between the mounting holes where the Podium feet…

view full answer...

Answer 4

Yes you can trim down the ends of the Thule ProBar Evo Crossbars #TH713600 that you referenced to shorten them as needed.

view full answer...

Answer 5

Yes, the Rapid Podium Feet for Thule Crossbars - Fixed Point - Qty 4 #TH460R will allow you to attach aero-style Thule crossbars on top of your Leer topper with Thule tracks. The Rapid Podium Feet will fit right into the tracks. If you need a…

view full answer...

Answer 6

The truck caps use the rails that the Thule Podium Feet #TH460R are compatible with when you use the Thule Fit Kit for Podium Style Foot Pack #THKIT3101. You would then need the appropriate length crossbar. For an Aero WingBar 53 inch #TH711420 or…

view full answer...

Answer 7

It sounds like you are looking for a roof rack for either a camper shell or a trailer with an elevation change on the roof of it. Because of that I can't recommend a roof rack that uses tracks since they are rigid and would not be compatible with…

view full answer...

Answer 8

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 9

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 10

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 11

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 12

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...