Recommended Trailer Hitch And Trailer Wiring For 2012 Volvo XC60

Question

Question:

There is no video for the XC 60. 2012 model. Which video out of the ones listed can I use?

asked by: T S

1

Helpful Expert Reply:

If you are looking for a video that explains how to install a trailer hitch on a 2012 XC60 I can help you out. The XC60 is the same generation for 2008 and up so the installation for a hitch on your 2012 would be the same for those vehicle.

The hitch you came from, part # 13268 is a Class lll hitch from Curt. This is a Class lll hitch and it has a 2 inch receiver opening. I have attached a video for this installation of this hitch on a 2013 XC60 which would be the same as your 2012.

If you plan on doing some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag.

If the ball mount kit does not include a ball mount with the right rise or drop to tow the trailer level, check out the link I have included that explains how to measure to choose a ball mount to tow the trailer level.

If you need trailer wiring for your Volvo I recommend part # 118739. The connection points for this harness c an be found behind the driver side tail lights.

When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.

expert reply by: Jeffrey L

1

Answer 1

Whenever there are Class II and Class III trailer hitch options for a vehicle I always recommend going with the Class III for a few reasons. First, the Class III hitch is going to be stronger, more metal, and considering that you are towing a trailer…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 5

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

For a hitch I recommend the Curt #C94WR. This fits all models of the 2024 Kia Sportage including your PHEV. This is a Class III hitch with a 2" receiver and a max gross trailer weight of 3,500 lbs. It has a simple bolt-on installation and comes…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Recommended Trailer Hitch And Trailer Wiring For 2012 Volvo XC60

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching