Recommended Front Hitch for 2005 Chevrolet Trailblazer

Question

Question:

I have a 2005 Chevy Trailblazer, I notice you have a front mounted hitch for a Blazer but it does not have Trailblazer as an option to choose from. Please provide more information particularly installation proceedures, class type, size, etc. Thanks

asked by: Chris T

0

Expert Reply:

No problem, I can help you find the correct front hitch for your 2005 Chevy Trailblazer.

The part number you are looking for is the Curt # 31055. There is not a Class rating on front hitches typically but this hitch has a 350lbs Vert Pull and a 9,000lbs Line Pull. The hitch has a 2 inch receiver and is a no drill installation application. According to the instructions, which I've attached to this page for you, it looks like the install should take about 45 minutes and there is one note about trimming the underbody panel slightly for proper fitment.

I have linked the front hitch to this page as well as all the custom fit items for your Trailblazer for your convenience.

expert reply by: Jackie C

0

Answer 1

I spoke with my contact at Curt, and they have not had a chance to test fit the front mount hitch on an SS model. Frame should be the same between the SS and other models, but the SS front fascia is much different so it may require some fascia…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The…

view full answer...

Answer 3

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and…

view full answer...

Answer 4

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on…

view full answer...

Answer 5

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side.…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 8

I would love to help you upgrade the suspension on your Twilight 2800 travel trailer. The MORryde Rubber Equalizers for Tandem Axle Trailers #MR87ZR that you referenced are a great solution but we do need to double check a few things. First is that…

view full answer...

Answer 9

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 10

If your old axles have a 5 bolt brake flange the assemblies like Dexter Electric Trailer Brake Assembly - 12" - Left Hand - 6,000 lbs part #23-105 or Dexter Electric Trailer Brake Assembly - 12" - Right Hand - 6,000 lbs part #23-106 will…

view full answer...

Answer 11

The Trailer Leaf Spring, 2250 lbs. 6 Leaf, item #e27SR, is sold as a replacement spring for older trailers and measures 26 inches for eye to eye, center to center. If you are replacing the springs and hangers you will need to use the same center to…

view full answer...

Answer 12

The installation instructions for this product are recommended for individuals who have experience winding torsion springs. If you have not worked with a torsion spring system before, we recommend contacting a local garage door company to install…

view full answer...

Recommended Front Hitch for 2005 Chevrolet Trailblazer

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching