Recommmended Landing Gear Jack Crank Handle for 2008 Pace American Enclosed Car Hauler

Question

Question:

Looking for a landing gear crank handle for a 2008 pace American enclosed car hauler PRG536TA4. Dont know what make the landing gear is. Can you help me find one? Thanks

asked by: Karen

0

Expert Reply:

Thanks for your picture. Sounds like you have a Bulldog Sidewind Landing Gear and although we cannot be for sure that this is a Bulldog 2-Speed Landing Gear, I can tell you that when I researched your Pace American Trailer it typically is outfitted with a 2-speed landing gear.

Without knowing the exact model you have, my best recommendation is the vertical clevis crank # BD015181. the horizontal clevis crank # BD800090, or you may need something more heavy duty. All of these crank handle assemblies have a 13-1/2 inch radius and all the mounting hardware included.

I have linked the above mentioned products to this page for your convenience.

expert reply by: Jackie C

0

click to enlarge

Answer 1

We have two options that would work for your MTI 48ft. gooseneck trailer. Option #1: Ultra-Fab Products Trailer Jack -#UF17-943010 - with this option it has a combined weight capacity of 12,000 pounds, which will currently hold your trailer and…

view full answer...

Answer 2

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 3

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 4

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 5

I agree it is the right time to upgrade to a Lithium charger/converter as not all are Lithium compatible. I recommend using the Progressive Dynamics Mighty Mini AC/DC Panel and Converter/Smart Charger - 60 Amp #PD4060K which is a replacement for your…

view full answer...

Answer 6

What you need for your Isuzu NPR truck is a powered converter #C59236. It is compatible with incandescent and LED trailer lights. I have included a link to the installation instructions for you. This harness does require a direct connection to the…

view full answer...

Answer 7

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 8

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 9

From what I could find it looks like your 122R (red) and 122Y (amber) lights measure 3.75" x 1.70" x .81". We don't have any replacement lense directly for the GLO-BRITE lights but we do have some similar lights that you could use…

view full answer...

Answer 10

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 11

Assuming your Sprinter has the factory tow package with the 7-way at the rear bumper, in addition to the #RED24FR Redarc Tow-Pro Liberty Brake Controller, you'll also need the #3063-P wiring harness and the #331-TPH-017. The connector to install…

view full answer...

Answer 12

The length of wire desired depends on your vehicle connection and your personal preference. You want enough slack for turning, but not so much for dragging as you mentioned. A little extra slack isn't a problem and not enough could lead to stress…

view full answer...

Recommmended Landing Gear Jack Crank Handle for 2008 Pace American Enclosed Car Hauler

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching