Recommended Trailer Wiring Harness For 1992 Chevrolet 1500 Pickup Truck
Question:
I am working on a 1992 chevyk1500 and im adding a 60inch light bar that mounts under tailgate right above bumper and it plugs into factory harness to operate and that leaves no where to plug original tail lights or plug in for pulling trailor towing this is a 4 flat factory.do you have a adapter that has 2 connectors leaving where I would splice into factory instead of making 2 splices.Im just trying to make it look neater for my customer.THANK YOU
asked by: Terry S
Expert Reply:
To add an additional 4-way connector on the 1992 Chevrolet 1500, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part # 118315.
This plugs into the connection points along the frame rail under the truck on the driver side. There is no cutting or splicing into the truck wiring to install this.
When working with electrical connectors I recommend using dielectric grease like part # 11755. This keeps dirt and moisture out of the electrical connections and helps prevent corrosion.
Products Referenced in This Question
Dielectric Grease for Electrical Connectors, 2 oz.
- Accessories and Parts
- Trailer Wiring
- Wiring
- Dielectric Grease
- LubriMatic
more information >
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Search Results: 4 pin female
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118315 Review
- Video: Review of Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 41125
- Shop: BoatBuckle Kwik-Lok Gunwale Tie-Down Strap - 2" x 16' - 400 lbs - Qty 1
- Shop: BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap - 2" x 10' - 400 lbs - Qty 1
- Shop: Brophy Mounting Bracket for 4-Pole Flat Trailer Connector
- Shop: BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap - 2" x 13' - 400 lbs - Qty 1
- Shop: BoatBuckle Pro Series Kwik-Lok Gunwale Tie-Down Strap - 2" x 16' - 400 lbs - Qty 1
- Video: BoatBuckle Kwik-Lok Gunwale Tie-Down Strap Review
- Video: SmartStraps Gunwale Tie-Down Strap Review
- Video: BoatBuckle Tie Down Straps - Trailer - IMF17635 Review
- Video: Review of SmartStraps Tie Down Straps - Trailer - 348501
- Video: BoatBuckle Tie Down Straps - Trailer - IMF17636 Review
- Q&A: Electric Brake Controller Installation Instructions for a 1991 GMC C/K Series Pickup
- Shop: Vehicle Tow Bar Brake System
- Q&A: Wiring to Add 5-Way Harness on 1992 Chevy Silverado to Connect to Boat Trailer
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Adding a Brake Controller to a 1995 Chevrolet 3500 to Tow a Gooseneck Trailer with Electric Brakes
- Q&A: How To Wire Brake Controller in 2000 Chevy K2500
- Q&A: Recommended 7-Way Harness for 1995 GMC Sierra
- Article: Basics of Tie Down Straps
- Article: RV Propane 101: How Does My RV's Propane System Work?
- Q&A: What Gauge Wire Is Required On a 7-Way Connector
- Search Results: hitch
- Shop: Trailer Hitch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: trailer hitch
on Custom Fit Vehicle Wiring
