Replacing Suspension Hardware For Harbor Freight Single Axle Trailer With Slipper Springs
Question:
I have a Harbor Freight 40 x 48 single axle trailer with the OEM slip springs, Id like to replace those with the double eyed leaf springs and the Shakles but having trouble figuring out what parts are needed. I think I need the 2000 lb 3 leaf double eye set, and I think I need the axle hardware to mount / secure it to the axle and then I need the shackle set. Any suggestions on what part list I need or kit?
asked by: Greg F
Expert Reply:
The first thing you will need to determine is what the weight capacity of the trailer is. There should be a plate or sticker on the trailer or on the axle with those numbers.
We offer a 2-leaf slipper spring, part # SP-179275, for 2,000-lb axles. I have attached a drawing of a leaf spring with the dimensions for the SP-179275 leaf spring you can check out. These springs measure 1-3/4 inches wide and have an eye diameter of 9/16 inch.
The U-bolt mounting kit for these springs is part # APUBR-10. The hangers and shackles you use depend on the clearance you need for your trailer.
I have attached a helpful article that explains slipper spring suspension and what is needed. I also attached a link to our product page for suspension hangers and kits for slipper springs you can take a look at.
Products Referenced in This Question
U-Bolt Kit for Mounting 2,000-lb, Round Trailer Axles - 4-1/4" Long U-Bolts
- Trailer Suspension Parts
- U-Bolt Kits
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Dexter
more information >
Product Page this Question was Asked From
4-Leaf Slipper Spring w/ Radius End for 2,000-lb Trailer Axles - 24-5/8" Long
- Trailer Leaf Springs
- Slipper Springs
- Radius End
- 2000 lbs
- 1-3/4 Inch Wide
- 4 Leaf
- 24-5/8 Inch Long
- Universal Group
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Kenda Loadstar 5.30-12 Bias Trailer Tire with 12" White Wheel - 5 on 4-1/2 - Load Range C
- Q&A: Replacement Axle for Harbor Freight Trailer
- Q&A: Recommended Axle Upgrade For Installing 15" Wheels and Tires On Harbor Freight Trailer
- Q&A: Can a Different Axle be Installed on a Harbor Freight Trailer Frame that is 48 Inches Wide
- Q&A: Upgrading the Axle on 4x8 Trailer
- Q&A: Axle Upgrade for my Harbor Freight 1720 Utility Trailer
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 5 on 4-1/2 - LR D
- Shop: Kenda K353 Bias Trailer Tire - 5.30-12 - Load Range D
- Shop: Kenda Karrier S-Trail ST145/R12 Radial Tire w/ 12" White Spoke Wheel - 4 on 4 - LR D
- Shop: Dexter Trailer Idler Axle w/ Idler Hubs - EZ-Lube - 4 on 4 Bolt Pattern - 60" Long - 2,000 lbs
- Shop: Timbren Axle-Less Trailer Suspension w Idler Hubs - Standard Duty - No Drop - 5 on 4-1/2 - 3,500 lbs
- Shop: Kenda KR25 ST145R12 Radial Trailer Tire with 12" Aluminum Wheel - 4 on 4 - Load Range D
- Q&A: Are Bias Tires Okay for Highway Use
- Q&A: Is Bushing Required on Open Eye End of Slipper Spring
- Search Results: harbor freight trailer
- Article: Trailer Tire Sizing
- Shop: Trailer Hitch
- Search Results: lug nuts
- Article: Trailer Wiring Diagrams
- Video: Timbren Axle-Less Trailer Suspension System Installation
- Search Results: lug nut
- Shop: Trailer Wiring
- Article: Most Popular Wheel Bearings
- Shop: Suspension Enhancement
- Search Results: trailer tires and wheels
- Shop: Brake Controller
- Search Results: axle
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Shop: Gooseneck Hitch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
on Trailer Suspension Parts
