Will Bunk Style Guide-Ons Work with a 21 Foot Seaswirl Boat

Question

Question:

I have a 21 ft. Seaswirl. Any reason they will not work for this size of boat?

asked by: Andy C

0

Expert Reply:

There isn't a set boat length require when using the CE Smith Bunk-Style Guide-Ons # CE27600. The bunks themselves are 60 inches long and will help you to keep the boat centered between them longer than post style guide-ons would. This is especially helpful if you have a boat that tends to want to wonder at the front when loading it back on the trailer.

expert reply by: Michael H

0

Answer 1

I am not sure I totally understand what you are asking but the CE Smith Bunk-Style Guide-Ons for Boat Trailers part #CE27600 comes with two 5' long bunk boards as well as the brackets needed to attach them. These bunk boards will only require…

view full answer...

Answer 2

I do have an option for you, but there is not a version of the CE Smith Bunk-Style Guide-Ons for Boat Trailers #CE27600 you were looking at that is any longer or designed for tandem axle trailers. Instead you will need to go with the CE Smith…

view full answer...

Answer 3

The overall height of the CE Smith Bunk-Style Guide-Ons #CE27600 is right at 21 inches. I also attached an install video for this kit for you to check out as well.

view full answer...

Answer 4

For bunk style guide-ons such as #CE27600 the bunk board and boat should only barely touch if at all. There isn't a hard and fast rule that says it should be this many inches. But since guide-ons are not meant to support weight like a…

view full answer...

Answer 5

If you are installing just the Firestone Ride-Rite kit, #F2400, and not also adding an on-board air compressor such as #F2158, then I would estimate that it should take about 2 hours to install the kit. That is for someone with some mechanical…

view full answer...

Answer 6

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 7

Your trailer looks awesome! The Road armor equalizers #LC696740 and Equa-Flex Cushioned Equalizers #LC279687 are both pretty similar in performance even though the Road Armor has two dampers. The main difference is the size of the equalizers. The…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Answer 10

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 11

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Answer 12

While we have the measurements of the exact ground clearance height for our hitches we carry for a 2022 Toyota Sienna, we do have available measurements for a 2021 model. While these are not exact, the measurements will not deviate much from the…

view full answer...

Will Bunk Style Guide-Ons Work with a 21 Foot Seaswirl Boat

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching