bing tracking image
Q & A Icon

Parts Needed to Flat Tow a 2016 Ford Explorer behind an RV  

Question:

Please can you give me a list of the components needed so I can tow my 2016 Ford Expoloer 4x4 behind my RV.

0

Expert Reply:

First you will need to start with a base plate kit to provide the connection point for the tow bar. For that you want the part # DM9519329.

In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Commander # DM9511012. It includes safety cables as well.

For lighting you can use the diode kit, # RM-15267, and not have to worry about cutting into the taillight housing. This will splice into your taillight wiring to allow your tow vehicle to control the taillight assemblies of the towed vehicle. This comes with a round 6-way connector that you will install on the front of your towed vehicle and enough coiled wire to go from there to the RV.

And finally, most states now require supplemental braking in the vehicle being flat towed. The easiest systems to set up and use are the portablel systems like the Blue Ox Patriot # BLU37TR. It applies the vehicle brakes in proportion to how much the tow vehicle is braking. This is the safest way to stop and it reduces wear and tear on both vehicles. You need a 12-volt outlet kit, # RM-9332, to power the braking system as well.

Most likely you will also need a high low adapter so that the tow bar will be level when you are flat towing. I attached a link to a page that has all of the ones we carry.

I have included a couple of helpful links to our articles on flat towing for you. Be sure to consult the vehicle owners manual for more specific information on flat towing your vehicle.

expert reply by:
0
Jameson C
click to enlarge

Products Referenced in This Question





Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>