What is Length Of Ratchet Strap from Mounting Surface for Erickson E-Track Strap EM59140
Question:
How long is the tail from the ratchet? In other words when I attach it to the wall how far out is the ratchet from the wall?
asked by: Gary G
Expert Reply:
I pulled from our warehouse a sample of the Erickson E-Track Strap with Ratchet # EM59140 so that I could determine how far the strap tail will extend from the wall or other attachment point when this part of the assembly is installed in an E-Track.
When the strap is extended so that it is taut, the steel E-Track fitting and the nearest edge of the ratcheting mechanism's handle (when in the down position, nearest to the fitting) will be 4-3/4-inches apart. When the handle is up there will be approximately 6-inches between the nearest edges of the fitting and ratchet frame, as shown.
Product Page this Question was Asked From
Erickson E Track Strap with Ratchet - 2" Wide x 20' Long - 1,165 lbs
- E-Track
- E-Track Straps
- 2 Inch Wide
- 1000 lbs
- 20 Feet Long
- Erickson
more information >
Continue Researching
- Shop: Erickson E Track Tie-Off w/ D-Ring - 2" Wide x 8-1/4" Long - 1,200 lbs
- Shop: Erickson E Track Strap with Ratchet - 2" Wide x 12' Long - 1,165 lbs
- Video: CargoSmart E-Track or X-Track System Motorcycle Wheel Chock Review
- Video: CargoSmart E-Track or X-Track System Hose and Cord Holder Review
- Video: etrailer Horizontal E-Track Review
- Video: Review of Erickson Tie Down Straps - Roller Idle Ratchet Strap and E-Chock Set - EM58523-09162
- Video: Review of etrailer E Track - E-Track Rails 4 Pack - e42VR
- Video: Malone Utility Trailer TopTier Load Bar Kit Review and Installation
- Video: CargoSmart E-Track or X-Track Utility Track Bag Review
- Shop: CargoSmart Utility Bag for E Track or X Track - 22 Liters - 24" x 14" x 4"
- Shop: CargoSmart Locking Cabinet for E Track or X Track Systems - 12" x 12" x 6" - 100 lbs
- Shop: Snap-Loc E Track Tie-Down Strap w/ Cam Buckle - 2" x 8' - 1,000 lbs
- Shop: Erickson E Track Tie-Down Kit w/ 2 Ratchet Straps with Roller Idlers and 2 Wheel Chocks - 1,100 lbs
- Q&A: What Material is Brophy Stop Plate for E-Track Part # ETHSB Made From
- Q&A: Are Snap Loc and Erickson E-Track Components Compatible
- Q&A: What Gauge Steel is the Erickson E-Track # E19144
- Q&A: Can Erickson E-Track Tie-Down Kit be Used with 20 inch Wheel and Tire
- Article: How to Install E-Track in 3 Easy Steps
- Shop: Brophy Stop Plate for E Track - 8" x 8" - Black
- Q&A: Recommended Tie-Downs to Secure Newer Mustangs with Limited Wheel Well Clearance to Trailer
- Shop: Trailer Hitch
- Article: Trailer Wiring Diagrams
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Search Results: e~track
- Shop: Trailer Wiring
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Search Results: e track
- Search Results: e track
on Tie Down Straps
