Recommended Trailer Brake Controller for International Truck Towing Triple Axle Trailer

Question

Question:

I need some information about brake controllers. I have a seed wagon that has 3 axles rated at 7000# each and need an electric brake controller. I will be pulling the wagon with a international 4700 what controller would be the best for this wagon. It will have a max towing load of 21,000#

asked by: Greg T

0

Expert Reply:

The Tekonsha Prodigy P3 Brake Controller # 90195 is a class-leading product with excellent user-friendly features, proven reliability and high ratings from our customers. It is an ideal choice in a proportional type brake controller, one that will slow your trailer in direct proportion to the slowing of the tow vehicle for smoother performance.

The P3 has the capability to handle up to four axles worth of electric drum brakes so it will be well able to operate your triple-axle braking application. It also has the flexibility to work well with EOH (electric-over-hydraulic) brakes by selecting that mode of operation from the menu.

You will want to see if there is a brake switch above the brake pedal. If there is then use a circuit tester such as # PTW2993 to test the wires. You are looking for one that only has power when you step on the brake pedal. If it has power with the head lights or turn signals on it is not the correct wire. A lot of vehicles with air brakes do not have this wire which connects to the brake controller red wire.

The white wire needs to ground to the negative battery terminal. Black goes to the positive battery terminal via a 40 amp circuit breaker, and blue is output to the trailer brakes. I recommend using installation kit # 5506 for the installation. If the truck does not have a 7-Way connector then you will need to have one installed so instead of # 5506 you could use # ETBC7.

expert reply by: Adam R

0

Answer 1

The Universal Wiring Harness w/ ModuLite and Brake Controller Harness, part #22551 is designed as a hardwire kit that pretty much includes everything you need to install a 7-way trailer connector on your Range Rover. The module protects your vehicle…

view full answer...

Answer 2

The brake signal is run along with the blinker on separate wires. The passenger side is normally green and carries the right turn and brake light. The driver's side is normally yellow and carries the left turn signal and brake. The remaining…

view full answer...

Answer 3

We may have a solution for you. To wire a brake controller on your 2007 International Trucks 4300 Series, you need to wire the controller's red wire to the stop light circuit. If the only wire you've found for brake lights is tied to the turn…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 9

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

For your 2024 Hyunda Santa Cruz we have the Curt 7-way kit part #C68JR that is a confirmed fit. This installs by plugging into a factory wiring connector on your vehicle which means a really easy install that doesn't require any splicing.

view full answer...

Answer 12

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...