Installing Curt T-Connector Vehicle Wiring Harness on 2015 Honda CR-V
Question:
which connector goes to which
asked by: David
Helpful Expert Reply:
To install the Curt T-Connector Vehicle Wiring Harness # C56158, the white connectors will plug into your vehicle's existing factory wiring connectors. The connectors you will want to access are behind the driver's side rear access panel in the cargo area.
Once you have access behind the rear trim panel, you will want to find the connectors for the vehicle taillight wiring. Typically these connectors are blue, but they may be a different color in your vehicle. The taillight wiring connectors may be located further up in the trim panel. These connectors will be similar to those on the Curt wiring harness.
There is a locking tab on the taillight wiring connector that will need to be disengaged to pull the connectors apart. You will then want to match the connectors from the Curt wiring harness to their mating connector on the vehicle. As these connectors T into the existing wiring, they will only fit together with the vehicle connectors one way, like a plug and socket.
I have attached a photo of the connector ends of the Curt wiring harness, as well as the installation instructions of the wiring harness.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Video: Best 2014 Honda CR-V Custom Fit Vehicle Wiring Harness Options
- Video: Curt LED 4-Way Flat Connector Vehicle End Tester Review
- Video: Trailer Wiring Harness Installation - 2015 Honda CR-V C56158
- Video: Hopkins Plug-In Simple Vehicle Wiring Harness Installation - 2015 Honda CR-V
- Video: Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118561 Review
- Video: Trailer Hitch Installation - 2016 Honda CR-V - Draw-Tite
- Shop: Cabin Air Filter
- Shop: Vehicle Tow Bar Wiring
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Mounting Bracket 4-Pole Flat
- Shop: Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: Curt LED 4-Way Flat Connector (Vehicle End) Tester
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Search Results: 68149
- Shop: Brake Controller
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 25580
- Article: My Trailer Hitch Doesn't Fit
- Q&A: How to Determine if Trailer Axle is Not Aligned and How to Measure to Replace Trailer Axle