Availability of # 4872SM Surehoof Ribbed Trailer Mat

Question

Question:

Do you have or can you get other Surehoof mats? Im looking for 4872SM in addition to the 3622RM you sell.

asked by: Charles C

0

Expert Reply:

We do indeed have the Surehoof # 4872SM. The ribbed mat measures 48 x 72 inches and is 1/2 an inch thick.

expert reply by: Mike L

0

Answer 1

We do have some wall liners for you, but unfortunately we do not have TrailerWare wall liners. From Surehoof we have some Ribbed Rubber Trailer Mats, 36" x 22" #3622RM and 48" x 72" #4872SM, which can be used for…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Hey Roy, The only U-bolt kit we currently only offer for 1-1/2" square axles is part #CE23102, which only has a 3-3/8" length so it likely wouldn't be the best option for you. Instead you'll want to order the…

view full answer...

Answer 5

The best brake controller option to go with is one that activates the brakes proportionally instead of time delayed. A proportional brake controller will activate the trailer brakes at the same time and with the same intensity as the tow vehicle…

view full answer...

Answer 6

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 7

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the…

view full answer...

Answer 8

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

view full answer...

Answer 9

The surest way to determine your F-150's towing capacity is to check the door jamb sticker on the driver's side. You will want to find the GCWR (gross combined weight rating). GVW is curb weight plus the weight of passengers and cargo. You…

view full answer...

Answer 10

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Answer 11

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 12

The Flint Hill Goods Square LED Brake Light Hitch Cover for 2" Hitches #FHG72VR would indeed be compatible with the #118384 on your 2012 Chevy Colorado. Using the turn signals will not cause the hitch cover to blink. The cover will light when…

view full answer...

Availability of # 4872SM Surehoof Ribbed Trailer Mat

Products Referenced in This Question

Continue Researching