Will the Clamps on the Thule EasyFold Bike Carrier Damage Bikes with Carbon Frames

Question

Question:

In some of the videos I have seen, you are suppose to turn the bike clamp knob until you hear the clicking sound. Although the clamp is cushioned and If I where to turn the knob until it clicks, will this this clamping force be large enough to damage carbon framed bikes?

asked by: Alan

0

Expert Reply:

Since carbon frames are not as resistant to clamping forces as steel or aluminum frames you would need to use caution when turning the knob on the Thule EasyFold Bike Carrier # TH903202. While it isn't too likely it would cause damage it is still a possibility on a carbon frame.

You might want to consider a different type of carrier such as the Kuat NV, # NV12G for 1-1/4 inch hitches or # NV22G for 2 inch hitches. This carrier does not touch the bike frame at all. It holds the bikes at the wheels.

The NV has a capacity of 60 pounds per bike and is made mostly out of aluminum so it is corrosion resistant. I have linked a video review for you.

expert reply by: Michael H

0

Answer 1

Yes the Specialized Turbo Vado will work out with it's 46.18" Wheel base that has a tire size just over 27" with a width of 1.85" will work out great with the Thule EasyFold XT 2 E-Bike Platform Rack part #TH903202.…

view full answer...

Answer 2

The best and easiest to use bike rack for your specialized e-bike is, hands down, the Thule EasyFold XT #TH903202. The reason for this is the amount of convenience features it gives you, such as an aluminum ramp to load and unload your bikes. The…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey James, so the thickness of the Small Coin Vinyl flooring #TS97FR that you referenced is 90 mil thickness.

view full answer...

Answer 5

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 6

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 7

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 8

You're in luck! There's no need for a 2" hitch if you want to carry two ebikes! I really like the Thule EasyFold XT 2 E-Bike Platform Rack #TH903202 for ebikes because it makes loading and unloading ebikes easier. It works with both a…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

Hello Ronnie, thanks for your question. You can use the Fat Bike Straps #TH985101 with the Thule Epos Bike Rack #TH99XE. Technically these straps are made for the Thule EasyFold XT bike rack, but we have double checked with the folks at Thule and…

view full answer...

Answer 11

In a sense, but not necessarily. The Thule EasyFold XT Bike Rack for 2 Electric Bikes #TH903202 is backed by a limited lifetime warranty so as long as it's used within the parameters of the weight capacities and what it's been tested and…

view full answer...