Adapter Plug For Optronics ONE LED Tail Light

Question

Question:

I did not receive the plug in for the STL003RFMB. Could I please get two of them?

asked by: AMBER

0

Expert Reply:

The plug you will want is part # AL45PWTB. This connector will work as an adapter from the # STL003RFMB light's weathertight connection point and industry standard 3-prong plugs. This part number includes one connector.

expert reply by: Victoria B

0

Answer 1

What you need is an anti-rattle device like part #63232. What this does is install in the hollow ball mount shank you have and pulls the ball mount to the hitch to remove the sloppiness. Also this has a lock built into it which makes a theft…

view full answer...

Answer 2

If you know the reference number that was printed on the key, we might be able to obtain a replacement key. If you don't know the key number, you best bet would be to drill the lock cylinder out, or use a cut-off wheel on an angle grinder to…

view full answer...

Answer 3

We do carry Moly grease like with the LubriMatic Moly EP grease part #LM54FR which would work great with the Curt Rockerballs like the part #C40047 that you referenced.

view full answer...

Answer 4

I went out to the warehouse to verify what style trim the GloLight LED Trailer Tail Light #STL111RFMB has. It does have the flat trim style. The A111TRSSB that is referenced in the video is a part that is no longer available, at the time the video…

view full answer...

Answer 5

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

view full answer...

Answer 6

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

What you're going to need is two of the transfer switches in that case. I have attached a diagram from Furrion that shows you how you're going to need to hook the two transfer switches #F30ATS up: -one to the other, then one branching off to…

view full answer...

Answer 9

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 10

That spindle looks pretty well destroyed so best option is going to be to replace the axle. You are going to need to measure your current axles in a few places to get the correct one as we don't have access to what your numbers reference. You…

view full answer...

Answer 11

I have a solution for you, but we do not carry Glo-Brite lights, so replacing it with the same brand will not be something I can offer you. Instead, to replace your Glo-Brite 9852-88, I recommend using the Optronics LED Trailer Tail Light #STL72RB.…

view full answer...

Answer 12

Replacement arms are available for the Roadmaster EZ5 Base Plate Kit #RM-521569-5 for your 2015 Honda Fit with the part #RM-ARMS. When the original base plate brackets and arms were manufactured, they were made as one part. To be sure that the new…

view full answer...

Adapter Plug For Optronics ONE LED Tail Light

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching