Moly Grease to Use with Curt Rockerball

Question

Question:

What grease can I use for the rocker ball It states to use moly grease but can’t seem to find it anywhere. Is there a part number or an example of what I can use ?

asked by: Jason A

0

Expert Reply:

We do carry Moly grease like with the LubriMatic Moly EP grease part # LM54FR which would work great with the Curt Rockerballs like the part # C40047 that you referenced.

expert reply by: Jameson C

0

Answer 1

The Anti-Rattle Device and Lock, #63232, is made of chrome plated steel. It does not have an official capacity because it has a higher breaking point than a hitch or ball mount that would be used with it. I have included a link to a video showing…

view full answer...

Answer 2

I have included a link to the installation instructions for the Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 below that will give you the correct torque specification. Be sure to follow the specifications listed in step 2 to ensure…

view full answer...

Answer 3

The Curt Rebellion XD Shock Absorbing Adjustable Ball Mount w/ 2" and 2-5/16" Balls #C83WR is 8" from the bottom of the receiver shank to the bottom of the adjustable mount.

view full answer...

Answer 4

The Curt RockerBall #C40047 requires a Molybdenum-based Grease #LM54FR. It is not acceptable to use the LubriMatic LMX Industrial Strength Grease #L11390. This information is found in the instructions linked below.

view full answer...

Answer 5

After you've packed the bearings and assembled everything, carefully slide the hub assembly onto the spindle and install the outer bearing. Install the spindle and tang washer and run the spindle nut down finger tight, then rotate the hub back…

view full answer...

Answer 6

From the base of the #C40047 up to the top of the ball measures 4.091 inches. This is about 1-3/8 inches taller than a standard ball.

view full answer...

Answer 7

If you already have the factory tow package for your 2022 BMW X5 with a fully functional 7-way RV connector at the back of our vehicle, this means an active 12-v feed to the pin in the 1:00 position; I suggest you go with the Curt Echo Wireless…

view full answer...

Answer 8

Yes, we do have a Shocker Hitch that will work great with the Curt Hitch item #C13417 on your 2023 Ford Ranger. It is the Shocker Hitch Air Cushioned Ball Mount item #SHK89VR. This cushioned ball mount has a 10,000 lbs capacity and comes with a…

view full answer...

Answer 9

The Curt Rockerball Shock Absorbing Hitch Ball has anti-Rotation Plate that is not compatible with all hitch mounts. This hitch ball is recommended to be mounted onto standard ball mounts not shock absorbing ones. I recommend the Curt RockerBall…

view full answer...

Answer 10

If you know the reference number that was printed on the key, we might be able to obtain a replacement key. If you don't know the key number, you best bet would be to drill the lock cylinder out, or use a cut-off wheel on an angle grinder to cut…

view full answer...

Answer 11

I went out to the warehouse to verify what style trim the GloLight LED Trailer Tail Light #STL111RFMB has. It does have the flat trim style. The A111TRSSB that is referenced in the video is a part that is no longer available, at the time the video…

view full answer...

Answer 12

What you need is an anti-rattle device like part #63232. What this does is install in the hollow ball mount shank you have and pulls the ball mount to the hitch to remove the sloppiness. Also this has a lock built into it which makes a theft…

view full answer...