Can Ultra-Fab Solar Plumbing Vent # UF53-945001 Be Used on 5th Wheel

Question

Question:

I see that this product is described as being used on a motorhome, will this product work on the roof of a 5th wheel trailer? Standard diameter of 5th wheel vent pipes being approx. 1.5 in.

asked by: Michael R

0

Expert Reply:

There's no reason why you wouldn't be able to use the Ultra-Fab # UF53-945001 Solar Powered Roof Vent on a fifth wheel trailer. My contact at Ultra-Fab has confirmed this for me.

expert reply by: Mike L

0

Answer 1

The air that vents out of the Ultra-Fab Solar-Powered Plumbing Vent #UF53-945001 actually comes out of the sides of the vent and not the top. Basically it comes up the center tube of the vent and the around the edge of the tube and then under the…

view full answer...

Answer 2

We have the Ultra-Fab Solar-Powered Plumbing Vent for Motor Homes - 7" Diameter x 3-3/4" Tall #UF53-945001 which is designed to be mounted on the roof. My recommendation is to use this roof vent and allow your side vents to stay as they…

view full answer...

Answer 3

To install the Curt hitch part #13571 the two bolt sizes needed are M12-1.25x40 and M10-1.25x35 which are included. If you need new bolts you can order them from us as part #RHK.

view full answer...

Answer 4

If you want to install the Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" #C13182 on your 2016 Jeep Grand Cherokee, you will use M14 bolts that are grade 5 as well as compatible flat washers. That is the replacement for what is…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 8

The first thing you will need for your 1999 D250 is a 4-way. The Curt T-Connector Vehicle Wiring Harness #C55317 plugs into the connection points behind your rear bumper and will allow you to power your trailer's signal lights. Once the 4-way is…

view full answer...

Answer 9

The Redarc Tow-Pro Liberty #RED24FR is the way to go over the Elite #RED44FR as you get the nicer functions of the Elite at a lower price. The Elite has the ability to be the more preferred proportional style of controller as well as a time-delayed…

view full answer...

Answer 10

If you have a vehicle specific wiring harness for a brake controller then that would indicate that you have a factory tow package and subsequently would already have a 7-way at the back of your vehicle. The universal 7-way connector #ETBC7 is meant…

view full answer...

Answer 11

For your 2024 Nissan Frontier I recommend the Redarc Tow-Pro Liberty Brake Controller #RED24FR. I like the Liberty because it is simple, reliable, and looks great in any vehicle. The main unit installs behind the dash, so only the control knob will…

view full answer...

Answer 12

Sure thing, I will go ahead and list out what you need for your 2023 Kia Sportage to add a 7-way for a brake controller so you can tow with the Curt Trailer Hitch Receiver #C94WR: - T-Connector Vehicle Wiring Harness with 4-Way Flat Trailer Connector…

view full answer...

Can Ultra-Fab Solar Plumbing Vent # UF53-945001 Be Used on 5th Wheel

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching