Will Swagman Skaha 2 Plus Bike Rack with Cargo Carrier Fit Toyota Sienna

Question

Question:

Hello, Do you have any advice on how the Swagman Skaha 2 Plus Bike Rack with Cargo Carrier would fit and work on a Toyota Sienna?

asked by: Jim K

0

Expert Reply:

Yes, Swagman Skaha 2 Plus Bike Rack with Cargo Carrier # S69SR will fit and work on your Toyota Sienna as long as it is equipped with a 2 inch trailer hitch receiver.

expert reply by: Leah S

0

Answer 1

Curt bike rack 18086 does not have a locking anti-rattle hitch bolt option. What we recommend is to use the regular hitch bolt and then use a cable lock, #C23666, to secure the bikes and rack to the hitch by running the cable through the hitch safety…

view full answer...

Answer 2

The anti rattle pin on the Curt 4 premium #C18087 is a threaded pin so a J-Pin stabilization device like you have will not fit the pitch of the thread in the shank. Honestly, you will get a decent amount of movement with any 4 bike platform rack. To…

view full answer...

Answer 3

The Yakima EXO Swing Away 2 Bike Rack w/ Cargo Carrier - 2" Hitches #Y54ZR is an excellent 2 bike rack option which can be used with or without a cargo basket. There are many other Exo system items that can be used with this system, one of which…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 7

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 8

There are some subtle difference between the Kuat Piston Pro Bike Rack for 2 Bikes #KU76ZR and the Kuat Piston Pro X Bike Rack for 2 Bikes #KU98VR. Overall the two racks are very similar, there are just some subtle differences/upgrades on the Piston…

view full answer...

Answer 9

The Kuat Sherpa 2.0 #SH22G and the NV 2.0 #NV22G that you referenced are both excellent platform-style racks that will hold your bikes by the front wheels with no frame contact. These are top-of-the-line carriers and you really would not go wrong…

view full answer...

Answer 10

Hello Jody, There is indeed a bike rack capable of carrying a pair of ebikes and a pair of road bikes at the same time, so long as you have a 2 inch hitch. That said, it really depends on how much your ebikes weigh, but a good option to start with is…

view full answer...

Answer 11

Hi Tracy, We can for sure get you a 3-bike rack for your ebike with a step-thru frame and two regular bikes. This is especially doable because your ebike is on the lighter side at just 40 lbs, and with that in mind what I recommend is a rack from…

view full answer...

Answer 12

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...