Brake Controller for a 2010 Toyota Tundra with Factory Tow Package

Question

Question:

I have a 2010 tundra 2 wheel dr and tow pkg. I am pulling a 2010 21 ft rockwood roo with dual axals. Which elec brake should I order? .

asked by: Steve

1

Helpful Expert Reply:

There are several great brake controller options but I usually recommend the Tekonsha P2, # 90885. It is our most popular controller of all time because it is easy to set up and use and has proven to be very reliable.

In addition to the brake controller you will also need wiring harness # 3040-P to plug it into your 2010 Toyota Tundra. Please note that this harness does have an additional white ground wire that you will need to connect to a bare metal surface.

I have included a link to a video shown how this controller and harness install.

expert reply by: Michael H

1

Answer 1

As long as you stay under the 10,300 pound mark you should be fine. Currently your trailer and gear estimate would weigh 9,100 pounds. Take a look at the rig when the trailer and truck are fully loaded as though you were ready to hit the road. If…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

To install your Tekonsha Prodigy on your 2000 Toyota Tundra, you will need the Brake Controller Install Kit, part #ETBC7. The kit includes all necessary parts and hardware for installing a controller on your vehicle. We have some online resources you…

view full answer...

Answer 4

As far as function goes, the two controllers are actually pretty similar. The primary difference between the two is that the P3 uses what I would call a more user friendly display. Instead of an error code like what's displayed on the P2, the P3…

view full answer...

Answer 5

The brake controller I recommend for your 2013 Toyota Tundra is the Prodigy P3, part #90195. It's our top selling brake controller because of how easy it is to use and how reliable it is. Since you have a factory 4-way trailer connector on your…

view full answer...

Answer 6

First, you will need to determine if your 2010 Toyota Tundra has a port under the dash for a brake controller. The port is located underneath the dash, to the left of the steering column, taped to another harness near the emergency brake pedal. Take…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 10

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 11

Hello Dan, I can definitely help with this. It is completely normal for the Curt TriFlex brake Controller #C24VV to show the current gain setting when the brakes are applied, or when the manual override is pressed. It sounds like you have the gain…

view full answer...

Answer 12

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Brake Controller for a 2010 Toyota Tundra with Factory Tow Package

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching