Adapter Recommendation for Allowing Yakima Hullraiser to Rhino Rack Aero Vortex Bars

Question

Question:

I have Yakima Hullraiser kayak brackets already.......will they fir correctly to the Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59inch Long - Qty 2 part number: RRVA150B-2

asked by: Bruce C

0

Expert Reply:

Since the Rhino Rack bars part # RRVA150B-2 that you referenced are aero in shape the adapter you need is the part # Y8860031 which allows the Hullraiser to fit aero shaped bars.

expert reply by: Jameson C

0

Answer 1

Yes, the Universal MightyMounts for Yakima Roof Mounted Accessories part #Y03590 would replace the Yakima SnapAround Mounting Brackets part #Y8810135 so that you can use your Yakima bike rack with the Rhino-Rack Vortex Aero Crossbars like part…

view full answer...

Answer 2

Yes, the Yakima FrontLoader #Y02103 is compatible with the Rhino-Rack Vortex Crossbar System for Retrax XR Series and Mountain Top EVO-M Tonneau Covers #RRVA180B-RRRLT600. The Rhino-Rack crossbars come with a plastic lock core but you can upgrade…

view full answer...

Answer 3

The adapter to change from a square bar to an aero bar on the High Roller is the Mighty Mount 39H Accessory Adapter part #Y03539. This will fit the original bolt and allow you to attach to your roof rack.

view full answer...

Answer 4

Thanks for the purchase and I'm happy to confirm that the Yakima HighRoad Roof Bike Rack #Y02114 is 100 percent compatible with the Rhino-Rack Roof Rack #RRVA126B-2, #RRRLKVA and #DK307 you have on your 2017 Ford Focus hatchback. The HighRoad…

view full answer...

Answer 5

In order to install Yakima's Raptor Aero Roof Mounted Bike Carrier Y02093 on your 2006 Toyota Sequoia you will use their Universal MightyMounts #Y03590. These adapters allow the Raptor Aero to fit onto just about any factory roof rack crossbar. I…

view full answer...

Answer 6

I checked your order notes and it looks like you bought the #SXBS1 back in March of 2012. The Yakima roof bike racks like the part #Y02115 would fit these crossbars well.

view full answer...

Answer 7

Most likely the answer to your question is yes. The Universal MightyMounts #Y03590 is designed to adapt most Yakima roof carriers to fit nearly all styles of roof rack crossbars. That being said since I do not know which carrier you have I cannot say…

view full answer...

Answer 8

It depends on your bike mount and brand. Yakima has their Universal Mighty Mounts #Y03590 that should help with most of your Yakima carriers. Thule has their Xadapt series: #Xadapt1 and #Xadapt2 for crossbars that have a t-track in them. If not, they…

view full answer...

Answer 9

Thank you for coming back to etrailer! Yes. The Yakima MegaWarrior Large Roof Rack Cargo Basket - Steel - 52" Long x 48" Wide #Y07080 will fit on aero/elliptical, round, square and most factory crossbars, so it's a great choice to add…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Adapter Recommendation for Allowing Yakima Hullraiser to Rhino Rack Aero Vortex Bars

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching