Recommended Trailer Hitch for 2014 Jeep Cherokee Trailhawk

Question

Question:

i cant see my jeep in the list its a jeep cherokee 2014 i dont know the best hitch for it can u help me plz :

asked by: Keven

0

Expert Reply:

I checked with my contact at Draw-Tite to confirm correct fits for a Class III 2-inch hitch for your 2014 Jeep Cherokee Trailhawk. You can use part # 75838 which offers a 600-lb tongue weight rating and a 6,000-lb gross trailer weight capacity.

This hitch bolts on using included hardware and requires no drilling. Written instructions and an install video are linked for you.

If you plan to tow you'll need a wiring harness # 118605 and a mounting bracket # 18144. You will also need a ball mount and hitch ball. You can use ball mount # 2923 and hitch ball # 63845 for a 2-inch size or # 19260 for a 1-7/8-inch ball.

expert reply by: Adam R

0

Answer 1

A trailer hitch receiver such as the Curt Trailer Hitch Receiver part #13535 which is a confirmed fit for your 2005 Honda CR-V is almost always going to be rated higher than the vehicle's towing capacity. You will need to abide by the lower of…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Erick, the correct size Bearing Buddy to use with the axle part #e75SR is part #BB2441 which has an outer diameter of 2.441 inches.

view full answer...

Answer 5

The towing capacity of any given vehicle is a function of several features including the engine, transmission, suspension and cooling system, among others, and the auto maker gets to determine how much weight any vehicle can tow. Sometimes addition…

view full answer...

Answer 6

Yes, the etrailer Trailer Hitch Receiver #e38AR for your 2019 Jeep Cherokee does come with the fish wires. If this is something you will be installing yourself a 2nd set of hands will come in very helpful since all 6 mounting bolts are fish wired…

view full answer...

Answer 7

The Curt #C13382 and etrailer #e98912 hitches for your 2022 Subaru Crosstrek have the same construction, capacities, and design, but the big difference is that the Curt hitch has the classic glossy finish while the etrailer hitch has a matte black…

view full answer...

Answer 8

The Draw-Tite #75838 is a confirmed fit on the 2015 Jeep Cherokee Trailhawk edition, but not the standard trim packages. If you've got any of the other trim packages outside of the Trailhawk then I recommend using the Curt #C13171 instead. This…

view full answer...

Answer 9

If your vehicle has a functional factory tow package there will be a connector at the rear of the vehicle behind the rear bumper. This connector could possibly be inside a black box that is mounted under the vehicle. If the connector is present you…

view full answer...

Answer 10

I checked the installation instructions for the Draw Tite Hitch part #75838 and there is no mention of lowering exhaust or removing body panels so no, you would not need to do either of those things to install this hitch on your 2014 Jeep Cherokee.

view full answer...

Recommended Trailer Hitch for 2014 Jeep Cherokee Trailhawk

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching