Trailer Hitch Installation - 2015 Jeep Cherokee - Curt Video

The Curt Class III hitch part #C13171 is the only hitch available for the 2019 Jeep Cherokee Limited that does not require modification to the fascia or exhaust according to Curt. The exhaust does need to be lowered for installation but not trimmed…

The Curt Class III hitch you referenced, part #C13171 is a fit for ALL models of the 2015 Cherokee. I've confirmed this with my Curt representative. If you'd prefer a hitch with a crossbar that's completely concealed behind…

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

The Draw-Tite #75838 is a confirmed fit on the 2015 Jeep Cherokee Trailhawk edition, but not the standard trim packages. If you've got any of the other trim packages outside of the Trailhawk then I recommend using the Curt #C13171 instead. This…

I checked the installation instructions for the Draw Tite Hitch part #75838 and there is no mention of lowering exhaust or removing body panels so no, you would not need to do either of those things to install this hitch on your 2014 Jeep Cherokee.

If your 2018 Jeep Grand Cherokee has the factory tow package and you are using the Curt T-Connector Vehicle Wiring Harnesse #C55774 you will need to go to your local Jeep dealer and have them re-flash your Jeep's computer in order to activate the…

In order to have a plug and play brake controller, your 2015 Jeep Cherokee Trailhawk would have to have the factory tow package and factory trailer connector. If you have those things, you would have have a plug-in option, with the connector being up…

Exhaust rattle is more common that you would think when installing trailer hitches. This is because the vehicle manufacturing process does not always leave the exhaust in the exact same location on every single vehicle. The rattling you are…

The Curt trailer hitch part #C13395 that fits your 2019 Jeep Cherokee does not require any rear fascia or bumper trimming to install! I attached a picture of what this hitch looks like when installed as well as a link to the detailed install…

There are trailer hitches we currently offer for your 2015 Jeep Cherokee Trailhawk. The two are Curt Class-III part #C13172 and #C13171. The one I recommend is part #C13171 because you don't have to trim your fascia. It is custom fit for your…

For a 2019 Jeep Cherokee Latitude, I'd recommend going with the Curt Class III hitch, part #C13395. I prefer this hitch to the #C13171 you'd looked at because once installed, it's almost completely hidden behind the Cherokee's bumper…

The crosstube for the Curt Class III Trailer Hitch Receiver #C13395 referenced in your question features an angled design and will sit a bit higher than the Curt #C13171 so it shouldn't rub up against the exhaust. This design also allows for a…