How Do I Install Wiring Kit 119176KIT on a 2002 Mercedes E320

Question

Question:

Are there Instructions for the upgraded Modulite Hardwire Kit for a 2002 Mercedes E320 4-matic Wagon?

asked by: Atul

0

Expert Reply:

Part # 119176KIT is a universal fit item as it will fit virtually any vehicle. There are not vehicle specific instructions available for it, but there are general instructions and we do have some videos that should be a big help.

I have added links to videos showing this kit being installed on a 2000 Cadillac DeVille and a 2002 Honda Civic.

expert reply by: Patrick B

0

Answer 1

The Kuat Piston Pro X Bike Rack #KU98VR is my favorite bike rack for styling and simplicity of use. Best of all it can be used with your Gazelle C380 e-bike even with you having the rear fender that nearly covers the entire rear tire. The Fender…

view full answer...

Answer 2

The hook of T2 bike racks like the part #TH83JV has to go on the front wheel in order for the bike to be properly secured. If you loaded the bike backwards and the steering wheel was in the rear wheel tray it would not be adequately secured. Since…

view full answer...

Answer 3

E-bikes are challenging in a few ways for bike racks in ways like you mentioned. The frames are unusual shapes, they are heavy, and they have fenders. This means you need a bike rack that uses unique frame clamps and that have higher weight…

view full answer...

Answer 4

I have a solution for you, but I can't recommend the Hollywood Racks Sport Rider SE, part #HLY84FR in this situation. The primary reason for this is that the 2017 Kia Soul only has fitting hitches that are Class I with a 1-1/4 inch receiver. The…

view full answer...

Answer 5

There is a cross member near where the exhaust comes close together that the plate will bolt through. If you check out the pictures I attached you will see exactly what I am talking about. The install should not be too bad, but any local garage would…

view full answer...

Answer 6

We have just what you need. For a 7-way adapter designed for German vehicles towing LED lighted trailer to prevent the bulb out error message we have the part #C57003. For an adapter that plugs into a 7-way and then provides a 4-way we have the part…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

How Do I Install Wiring Kit 119176KIT on a 2002 Mercedes E320

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching