Troubleshooting Driver Side Lights Not Function After Curt Wiring Install 2005 Jeep Grand Cherokee
Question:
I recently bought this connector. And I noticed today that after installing the wiring harness. The drivers side brake light and blinker no longer work. And they worked before I put this harness on. Is it so,ething in the converter box? I did everything according to the instructions. All the lights on my trailer work for the 4 flat plug in. Just not on my jeep
asked by: Ben E
Expert Reply:
You will want to first try connecting and disconnecting the driver side connectors of the part # C55451 to hopefully clear out any misconnection that it may have. If it still doesn't work you would want to test the converter box to determine if it is at fault.
What you will want to do is test the wires going into the box of the converter box for voltage with a circuit tester like the # PTW2993 to see if there is voltage going into the box when the taillight functions of your vehicle are applied, and then test the output side of the box to see if the current is making it through the converter. If not then the problem is that the converter box has shorted itself out and would need to be replaced.
Before you replace it you will want to inspect the wiring of your trailer to see if you can find anything that would cause the box to short out like corrosion or cut/exposed wiring. These boxes don't usually go out unless there is a short on the trailer that takes it out.
If there isn't input voltage for the converter then the problem is the wiring of the wiring kit. You will need to check to make sure it's making a solid connection to the correct circuits.
Products Referenced in This Question
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Trailer Wiring
- Shop: Trailer Hitch
- Shop: etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Video: Tekonsha Custom Fit Vehicle Wiring - Trailer Hitch Wiring - 118381 Review
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Q&A: Best Way to Add a 4-Flat and 7-Way Connector to a 2007 Jeep Grand Cherokee w/ out Tow Package
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Best 2007 Jeep Grand Cherokee Trailer Wiring Options
- Video: Trailer Wiring Harness Installation - 2007 Jeep Grand Cherokee
- Video: Roadmaster Tow Bar Wiring - Bypasses Vehicle Wiring - RM-155 Review
- Video: Trailer Wiring Harness Installation - 2005 Jeep Grand Cherokee
- Video: Trailer Wiring Harness Installation - 2001 Dodge Ram 3500 Van
- Shop: Curt Powered Tail Light Converter with 4-Pole Flat Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: trailer hitch
- Video: Choosing the Right Trailer Wiring
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Shop: Brake Controller
- Article: Trailer Wiring Diagrams
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Search Results: brake controller
- Search Results: trailer brake controller
- Article: My Trailer Hitch Doesn't Fit
- Q&A: What Is An OEM Prep Package And How Do I Know If I Have It