Dimensions of Mounting Holes on Curt Bumper Mount Trailer Hitch # 13326

Question

Question:

What is the center bolt pattern for item 13326 that you recomended for my 2002 dodge ram 1500. I need it to be 8 in. Center to fit factory bumper

asked by: William G

0

Expert Reply:

I went out to the warehouse and pulled the Curt hitch part # 13326 and took the requested measurement for you. The distance between the mounting holes is 8 inches from center of hole to center of hole. Check out the image I made for you showing these dimensions.

expert reply by: Chris O

0

Answer 1

The Draw-Tite Max-Frame Trailer Hitch Receiver item #75151 fits 2005 Dodge Ram 1500's that do not have a factory hitch. The hitch mounts directly to the bumper. I have linked a picture that shows how this hitch installs along with the…

view full answer...

Answer 2

Thanks for your pictures, this helped me identify that your hitch is a factory hitch on you 2007 Ram 2500. I can tell because of the design and the way the hitch is mounted to the cross-frame with a weld. I have linked all the hitches that will fit…

view full answer...

Answer 3

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 4

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 7

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 8

Since you have a wheelbase/axle spacing of 38 inches the correct hanger kit for slipper springs would be the part #HAP-105-205-01. And then for a 7k trailer axle the u-bolt kit you'd want would be the part #APUBR-8. I attached the diagram to use…

view full answer...

Answer 9

Since Demco uses 3,500 drum brake assemblies part #DMSB24429M and #DMSB24428M what you'd need is similar 3,500 electric brake assemblies like the etrailer part #AKEBRK-35L-SA for the left hand side and #AKEBRK-35R-SA for the right hand side. To…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

I would be happy to help you set up your 2022 Toyota Highlander to haul your new travel trailer. The wiring harness you currently have controls your trailer's lighting functions only. You do not need to rewire your Toyota you just need another…

view full answer...

Answer 12

If your current springs have 5 leaves then going to a 7 leaf spring will increase the height of the trailer a little and make the trailer more susceptible to sway. Regarding capacity if you go with springs rated higher than what is required it will…

view full answer...

Dimensions of Mounting Holes on Curt Bumper Mount Trailer Hitch # 13326

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching