Sway Bars and Steering Stabilizer for a 2003 Pleasure Way Excel TS Class B on Ford E-350 Chassis

Question

Question:

Is the RM-1139-117 the correct rear sway bar for my 2003 Pleasure Way Excel TS. It is on 2002 Ford E350 Chassis.If you could also specify the correct front sway bar and steering damper it would be greatly appreciated.

asked by: Andy R

0

Expert Reply:

Since your 2003 Pleasure Way Excel TS is a Class B motorhome built on a 2002 Ford E-350 chassis the correct rear sway bar would be the part # 1139-178.

Then for a front sway bar part # RM-1139-115.

expert reply by: Jameson C

0

Answer 1

Glad you came here to find some answers, I have a part that will fit your E-350: **Roadmaster Rear Anti-Sway Bar #RM-1139-117. First thing I'll tell you the TigerTrak is not a confirmed fit for a 2008 E-350 van. However, the Roadmaster Rear…

view full answer...

Answer 2

The best Rear Sway Bar Kit we offer is the Roadmaster Rear Anti-Sway Bar #RM-1139-117 which is made to fit E350 Class C with either the V8 or V10 engine and will doing an awesome job of preventing sway in your vehicle while driving. The Roadmaster…

view full answer...

Answer 3

The 4-way on your trailer is what's known as a wishbone connector like part #A35W42B. Two of the wires are the running light circuit which is a little easier to install since you can run one down each side of the trailer. This way you don't…

view full answer...

Answer 4

In regards to the Roadmaster Exact Center Steering Stabilizer part #RM47MR, the stabilizer installs on the front of the steering arm pointed down. I have attached a photo of this below. If this wasn't what you were looking for, please just let me…

view full answer...

Answer 5

Roadmasters priority when it comes to their sway bars is top notch quality and the easiest install for the customer. This typically cuts the install time down enough that you end up saving money if you pay to have the bars installed or decide to do…

view full answer...

Answer 6

The Roadmaster Rear Sway Bar part #RM-1139-147 that fits your 2017 Ford E-450 Class A motorhome does require drilling to install. New holes must be drilled in the frame to mount the Roadmaster end links. If you check out the attached install…

view full answer...

Answer 7

The torque spec for the rear U bolts on your 2019 F53 motorhome are dependent on the size. If you have 3/4 x 16 u bolts (and used a 1 1/8" socket to remove the nuts) then they torque to 250 lb-ft. If the u bolts are 7/8 x 14 (and you used a 1…

view full answer...

Answer 8

For driving and handling upgrades to a 2021 E350 Class-C, RV, I would recommend the following. Roadmaster #RM-RBK24-RSSC, Reflex Steering Stabilizer w/ mounting brackets. Compensates for over steering and returns your vehicle to center. Roadmaster…

view full answer...

Answer 9

SumoSprings are a super popular option to help support the suspension and increase ride quality for motorhomes. The majority of the installs we have come through the shop are typically SumoSprings because they offer a much softer progression instead…

view full answer...