Putting Titan Model 10 Trailer Brake Actuator Back Together
Question:
I bought this part to replace a smashed outer sleeve on my boat trailer hitch and didnt know it was sold as one unit I only needed the outer sleeve. Anyway, when I took off the master pins to take out the outer sleeve, as I pulled the sleeve out, the two rear rollers dropped down and were free. Now, I am trying to replace the broken outer sleeve, and cant get the rear rollers lined up with the holes on the dampers I cant get my fingers up in there and still slide the sleeve in. Any suggestions? My trailer is a 2008 Metal Craft trailer. I am pretty certain this is the exact part #T4750800 I bought through a local parts dealer.
asked by: Bill S
Expert Reply:
You will pretty much have to remove as much as you can from the interior of the Titan model 10 actuator # T4750800 to be able to get to the parts you need easily. You will have to remove the master cylinder and components forward of it but be careful not to pull the break away cable out too far because then it has to be reset and that is a whole other issue.
I have included a link to the installation details that does explain the process of putting the actuator back together. It is in the latter parts of the instructions. that and the parts breakdown and diagram should be a tremendous help.
Product Page this Question was Asked From
Dexter Zinc-Plated Brake Actuator - Disc - 2-5/16" Ball - Bolt On - 12,500 lbs
- Brake Actuator
- Surge Brake Actuator
- Straight Tongue Coupler
- Bolt-On
- 12500 lbs GTW
- 2-5/16 Inch Ball Coupler
- Disc Brakes
- No Lockout
- Dexter
more information >
Continue Researching
- Shop: Demco Hydraulic Brake Actuator w/ Drop - Drum - Zinc - 2-5/16" Ball - 12,500 lbs
- Shop: Dexter Zinc-Plated Brake Actuator - Drum - 2-5/16" Ball - Bolt On - 12,500 lbs
- Shop: Replacement Master Cylinder Assembly for Dexter Model 10 and Model 20 Brake Actuators - Disc
- Article: How to Bleed Your Trailer Surge Brakes
- Search Results: calkins trailer parts
- Shop: Hand Vacuum Pump Brake Bleeder
- Shop: Demco Hydraulic Brake Actuator w Drop and Electric Lockout - Disc - Zinc - 2-5/16" Ball - 16K
- Q&A: How to Replace the Shock on a Titan Model 10 Surge Brake Actuator
- Shop: Trailer Hitch
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Video: Choosing the Right Trailer Wiring
- Shop: Grease Seals 10-36 (pair)
- Article: Trailer Wiring Diagrams
- Search Results: 44649
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: How to Choose the Right Trailer Hitch Class
- Shop: Trailer Wiring
- Search Results: 68149
- Video: Lippert Solera Slider Slide-Topper Review
- Shop: Dust Cap for Kodiak Disc Brake Kit
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Video: Choosing the Right Brake Controller
- Q&A: Trailer Suspension Hanger Kit for Slipper Springs and 38 inch Wheelbase
- Search Results: 25580
- Search Results: dust cap
- Q&A: How Many Transfer Switches are Needed to Switch from Shore Power to a Genreator, and An Inverter?
- Video: Roadmaster Automatic Battery Disconnect Installation - 2020 GMC Sierra 1500
- Shop: Brake Controller
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Search Results: dust caps
on Straight Tongue Trailer Coupler
