How to Access Reverse Light Signal on 2014 Volkswagen Passat
Question:
Hi,Is there any product that will give me a reverse light signal that I can use to power a reverse camera without cutting any wires or using quick-splices?My vehicle is a 2014 Passat TDI
asked by: Pete
Expert Reply:
The only ways to obtain a reverse light signal to activate a backup camera like # HM50002 are to tap into the reverse light wire at one of the tail light assemblies, or if you happen to have a 7-way trailer connector on the vehicle, tap in to the reverse light signal wire that feeds the pin on the connector.
Please refer to the linked photo of a 7-way vehicle socket. The center pin carries the reverse light signal in most typical applications.
It is not difficult to tap into the reverse wire. Just use a circuit tester like # PTW2993 to identify the wire that carries the reverse signal (while a competent helper puts the car in reverse with the brake and emergency brake engaged for safety). Cut the wire and splice in a new length of wire using a butt connector such as # DW05714. Route that new wire to your backup camera.
Products Referenced in This Question
Butt Connector - PVC - for 16-14g Wire - Qty. 1
- Wiring
- Wire Connectors
- Butt Connectors
- 16-14 Gauge
- Deka
more information >
Product Page this Question was Asked From
Hopkins Smart Hitch Backup Camera and Hitch Aligner System
- Backup Camera
- Hitch Alignment Camera Systems
- Hardwired
- Dash Monitor
- 3.5 Inch Display
- Hopkins
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Article: Timbren Suspension Enhancement Systems
- Q&A: Does Bumper have to be Trimmed to Install Curt Trailer Hitch C13366 on a 2018 Volkswagen Atlas
- Q&A: Does the Curt T-Connector Wiring Harness Require Reprogramming on a 2018 Volkswagen Atlas
- Shop: Suspension Enhancement
- Shop: Towing Mirrors
- Shop: Trailer Wiring
- Shop: Base Plate for Tow Bar
- Shop: Curt Trailer Connector Adapter - 4-Way to 7-Way RV and 4-Way Flat
- Shop: CIPA Custom Towing Mirrors - Slip On - Driver Side and Passenger Side
- Shop: Flexco Manual Pull-Out Step for RVs - Single - 3" Drop/Rise - 24" Wide - 300 lbs
- Shop: Butt Connector - PVC - for 16-14g Wire - Qty. 1
- Search Results: c45155
- Shop: Curt Fusion Ball Mount for 2" Hitches - 2" Ball - 2-1/4" Rise - 7,500 lbs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Video: Choosing the Right Trailer Wiring
- Search Results: hitch
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Trailer Hitch
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket - Vehicle End
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Search Results: trailer hitch
- Shop: Vehicle Tow Bar Wiring
- Search Results: trailer hitch wiring
- Shop: Brake Controller
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: How to Choose the Right Trailer Hitch Class
- Video: Choosing the Right Brake Controller
- Search Results: brake controller