Recommended Roof Cargo Carrier For 1989 Westfalia With Yakima Crossbars

Question

Question:

Hi- I have a Yakima bars on my 1989 Westfalia.. I want that Pioneer Rhino basket..Will that work?

asked by: Tony

0

Expert Reply:

The Rhino Rack Pioneer cargo carrying platform you ask about, part # RR42115BF would indeed be compatible with the Yakima round profile crossbar roof rack currently on your Van. The tray measures 58 by 47 inches, so there's plenty of room for all your gear.

There are many compatible accessories available that would make securing your cargo easier, here's a listing of a few of them:

Ratchet strap kit # RR43175
LED light bar mounting brackets # RR43173
Gas can holder # RJCH-HOR
Propane tank holder # RRRGBH4

expert reply by: Jeffrey L

0

Answer 1

Great question! The spacing from the center of 1 track to the center of the next for the Rhino-Rack Universal Pioneer Platform Rack #RR42115BF is going to be 9" for those center slats according to my contact at Rhino-Rack. The distance to the…

view full answer...

Answer 2

The Rhino-Rack Accessory Bars for Pioneer Platform Rack - 48" Long - Aero Bars - Qty 2 #RR43137B will have a bit of overhang on your pioneer platform #RR42115BF. However, the accessory bars will fit your platform by utilizing the entire width…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 5

Yes, it will! To attach the Thule Caprock Platform Roof Tray item #TH58YE to the roof of your 2024 Subaru Forester Wilderness you will need the Evo Raised Rail Feet item #TH710401.

view full answer...

Answer 6

In order to attach the Rhino-Rack Pioneer Platform to a set of crossbars you would need the kit that comes with universal mounts which is part #RR42114BF for 48" long x 37" wide or part #RR42115BF for 58" long x 47" wide. This…

view full answer...

Answer 7

Thanks for the picture! The Rhino-Rack Universal Pioneer Platform Rack for Crossbars Item #RR42115BF will fit your Garvin Expedition crossbars if they are less than 3-5/8" wide. I have attached a couple of videos that demonstrate how this…

view full answer...

Answer 8

You can connect the Rhino-Rack Pioneer Platform - Universal Mount - 48" Long x 38" Wide #RR42114BF or the larger #RR42115BF using the T-bolts. You do not need to use the universal bar clamps and will not use all of the included pieces for…

view full answer...

Answer 9

Hey Andrew, yeah the 220lb capacity your bars are referring to is the dynamic capacity - so while the vehicle is in motion. When stopped the weight capacity is going to be likely around triple that since the weight won't be moving and be directly…

view full answer...

Answer 10

The Rhino-Rack Gas Can Holder for Pioneer Platform Rack - Horizontal Mount - 5 Gallon #RJCH-HOR will only attach with 2 bolts and channel nuts; not all 4 sides of the carrier will be attached to your Rhino Rack Pioneer Platform.

view full answer...

Recommended Roof Cargo Carrier For 1989 Westfalia With Yakima Crossbars

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching