Replacement 4-Way Trailer Wiring for 2007 Ford E250
Question:
2007 e250. need a trailer wire feed, the one that is on it now is a ford oem. the numbers on the tag read 13a576,7c24, c321k, with letters cc. 13a576 comes up good on your site, but its the wrong one. mine is a 4 pin flat. the numbers on the connector are pa/sps-gf20. any info would sure help. thanx
asked by: Joe
Expert Reply:
If you are needing to replace the 4-way on your 2007 Ford E250 you can use the Curt T-Connector Vehicle Wiring Harness, # C56020.
If you are actually looking to convert the 4-way to a 7-way you will need to use adapter # 37185. Your current 4-way will just plug into the 4-way plug on the adapter and the remaining 4 wires will need to be connected as follows:
White - Ground to the vehicle frame.
Black - Connect to battery with fuse or breaker for 12V power.
Blue - Connect to Brake Controller Output Wire
Purple - This will attach to the reverse light wire behind one of the tail lights. If the trailer does not have reverse lights or a reverse electric lock out then you can just tape up this wire and stow it out of the way.
I have attached a diagram of this for you.
Products Referenced in This Question
Adapter 4-Pole to 7-Pole and 4-Pole
- Trailer Wiring
- Wiring Adapters
- Multi-Function Adapter
- 4 Flat
- Plug and Lead
- 4 Flat
- 7 Round - Blade
- Hopkins
more information >
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Wiring
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Curt T-Connector Vehicle Wiring Harness for Factory Tow Package - 7-Way Trailer Connector
- Shop: Trailer Hitch
- Video: Trailer Wiring Harness Installation - 2006 Ford E-350 Van
- Shop: Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center - Custom Fit - Class V - 2"
- Shop: Ford Replacement OEM Tow Package Wiring Harness, 7-Way
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Trailer Wiring Harness Installation - 2004 Ford Van
- Shop: Reese Multi-Plug Wiring Harness for Factory Tow Package - 7-Way and 4-Way Flat Trailer Connectors
- Video: Choosing the Right Trailer Wiring
- Q&A: Is a Converter Box Needed for Trailer Wiring on a 2008 Ford E-350
- Q&A: Will the Curt T-Connector Vehicle Wiring Harness # C56020 fit a 2004 Ford E-250
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Video: Mighty Cord Replacement 7-Way Trailer Connector Installation - 2017 Ford Explorer
- Video: Curt Trailer Hitch Installation - 2003 Ford Van
- Video: Hopkins Custom Fit Vehicle Wiring - Trailer Hitch Wiring - HM11140495 Review
- Video: Trailer Wiring Harness Installation - 2006 Ford Van C56020
- Shop: Bumpers
- Shop: Brake Controller
- Shop: Base Plate for Tow Bar
- Search Results: 44649
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Wiring a Camper Shell Third Brake Light on a 2017 Chevrolet Silverado
- Search Results: 68149
- Article: How to Choose the Right Trailer Hitch Class
- Q&A: 10k Dexter Replacement Hub for a 8-415
- Article: Trailer Wiring Diagrams
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: 25580