How Tight Should Curt Friction Sway Control # 17200 Be Adjusted
Question:
how tight should the sway bar be for regular use? I used to have it pretty tight so it could not slide in and out freely. but my friend said its supposed to be able to freely move in and out? I know if the trailer is swaying tighten it up but I mean for regular use if its not swaying bad... still keep it tight? let is move freely?
asked by: Shaun
Expert Reply:
A friction type sway control unit like the Curt # 17200 should be adjusted so that it is not easy to move by hand, but still can be moved by the greater force from the moving trailer. You will need to do some road testing to find the correct adjustment for a given trailer load.
Trailer configurations and loading, road and weather conditions, towing speed, tire condition and pressure, and center of gravity of trailer all affect towing. To get maximum benefits from the sway control assembly, a series of road tests should be taken with the loaded trailer. On subsequent trips increase tension by turning the adjusting screw clockwise in 1/4-turn increments until the desired control is achieved.
It is best to carefully load your trailer to minimize sway as much as possible before apply the corrective effect of a sway control device. Trailers should be loaded with heavy items on the floor, in front of the axle. The load should be balanced side to side. Tongue weight should be 10-15% of gross trailer weight for most trailers. Insufficient tongue weight or tail-heavy trailers can cause sway. When towing in slippery conditions, such as wet, icy, gravel or snow covered roads, the sway control must be removed.
Product Page this Question was Asked From
Curt Friction Sway Control for Weight Distribution Systems
- Accessories and Parts
- Weight Distribution Hitch
- Sway Control Parts
- CURT
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: How Tight Should Bar Style Friction Sway Control Be
- Shop: Curt Friction Sway Control for Weight Distribution Systems
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 12,000 lbs GTW, 1,200 lbs TW
- Shop: Reese Friction Sway Control Kit - Economy - by Draw-Tite, Reese and Hidden Hitch
- Shop: Towing Mirrors
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 14,000 lbs GTW, 1,400 lbs TW
- Shop: Replacement L-Pins and Clips for Equal-i-zer Weight Distribution Systems - 6K to 14k - Qty 2
- Video: Longview Driver and Passenger Side Custom Towing Mirrors Installation - 2019 Chevrolet Silverado 150
- Video: Review of Reese Weight Distribution - Friction Sway Bar - 83660
- Search Results: trailer hitch sway bar
- Article: Determining Trailer Tongue Weight
- Q&A: Can Weight Distribution be Used on Vehicle with Auto Leveling Suspension
- Q&A: Should You Wait To Hook-Up Your WDS Before Or After Your Vehicle's Auto-Leveling Feature Is Complete
- Q&A: Will The Equal-i-Zer Sway Bracket Jackets Work W/ The Replacement L-Pins & Clips?
- Q&A: How Does Bar Style Friction Sway Control Work
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 16,000 lbs GTW, 1,600 lbs TW
- Shop: Equal-i-zer Weight Distribution System w/ 4-Point Sway Control - 6,000 lbs GTW, 600 lbs TW
- Shop: Trailer Hitch
- Q&A: How to Setup Curt Friction Sway Control on Trailer
- Q&A: Will Curt Friction Style Sway Control System Fit Curt 1400 Pound Weight Distribution System
- Video: Longview Driver and Passenger Side Towing Mirrors Installation - 2020 Chevrolet Colorado
- Search Results: pro pride
- Video: Curt Weight Distribution - Sway Control Only - 17200 Review
- Video: Optronics LED Trailer Tail Lights with Grommet and Pigtails Review
- Video: Optronics LED Trailer Tail Light Installation STL72RB
- Search Results: etrack spare tire holder
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Search Results: mirror extenders
- Search Results: mirror extensions
- Article: Which Sway Control Hitch is Right For Your Trailer?
on Accessories and Parts
James
5/3/2024
You say to make it as tight as you think it should be and then tow the trailer to see if it needs to be tighter or looser. What is it that we should look for to determine this? What performance aspect determines if we need to go tighter or looser? Give us something quantitative to look for or measure. So far all you have given us is to guess if it is tight enough.