Recommended 1-1/4-Inch Class II Hitch for 2015 Toyota Sienna AWD
Question:
I am looking for the lightest, least obtrusive Class II trailer hitch with a 1 1/4inch receiver for my new 2015 Sienna AWD. What do you suggest?
asked by: Dirk
Expert Reply:
We offer several 1-1/4-inch Class II trailer hitch receivers for your 2015 Toyota Sienna AWD that can be seen on the link provided. Among them the one I suggest for its higher 350-lb tongue weight (TW) rating is the Curt # C12065.
The actual weights of these various hitches do vary slightly but their resulting appearance after installation will be very much the same. Please refer to the linked video showing installation in a 2014 Sienna. All of the required hitch installation hardware is included.
The hitch with the actual lightest weight is Draw-Tite # 36513. This hitch includes the hitch pin and clip but not a ball mount. You can choose a ball mount with the correct rise or drop with the help of the linked article and product link. Towing also requires a wiring harness; you can use # 118648 from Tow Ready.
If you intend to use hitch-mount accessories like bike or cargo carriers you'll need to choose a Class II carrier from among those shown on the included links. An article is included to help you choose one that will fit well on your Sienna.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Powered Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 300 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- Draw-Tite
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Trailer Hitch
- Custom Fit Hitch
- Class II
- 350 lbs TW
- 3500 lbs GTW
- 1-1/4 Inch Hitch
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Trailer Hitch
- Shop: Trailer Wiring
- Article: How to Correct Noise from Exhaust Rattling Against a Trailer Hitch
- Article: My Trailer Hitch Doesn't Fit
- Shop: Curt Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Q&A: Recommended Hitch for Best Ground Clearance on 2011 Toyota Sienna
- Q&A: What Hitch Gives the Highest Ground Clearance on My 2022 Toyota Sienna?
- Shop: Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Draw-Tite Trailer Hitch Receiver - Custom Fit - Class II - 1-1/4"
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: Hopkins Plug-In Simple Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Video: Trailer Hitch Installation - 2015 Toyota Sienna - Curt
- Video: Curt Class II Euro Style Drawbar Review C45571
- Q&A: Installation Instructions for the Curt Hitch C12065 on a 2008 Toyota Sienna
- Q&A: What Size Tap Can Be Used to Clean Weld Nuts to Install Hitch on 2004 Toyota Sienna
- Q&A: Recommended Ball Mount for a 2006 Toyota Sienna Ball With a Class II Trailer Hitch
- Shop: Curt Class I Drawbar - 5" Rise - 9-9/16" Long - 2,000 lbs
- Shop: Curt Class II Euro Style Drawbar with 1-7/8" Ball - 4-5/8" Rise - 3,500 lbs
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Search Results: hitch
- Video: Choosing the Right Trailer Wiring
- Article: How to Choose the Right Trailer Hitch Class
- Search Results: 90160
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Trailer Wiring Diagrams
- Search Results: trailer hitch
- Video: Choosing the Right Brake Controller
- Shop: Brake Controller
- Shop: Suspension Enhancement