Size of the Bolts Used to Install a Hitch on a 2015 Dodge Grand Caravan

Question

Question:

I purchased a hitch for my 2015 Dodge Caravan. I lost the bolts to hold it to the car. Can you please tell me the size / thread / etc so that I may purchase replacements, or do you sell them?

asked by: Preston

0

Expert Reply:

The bolts used to install a hitch like the part # 13364 are the existing bolts that came on your 2015 Dodge Grand Caravan. The two sizes of the bolts are M10 CL10.9 and M12 CL10.9.

expert reply by: Jameson C

0

Answer 1

According to my research, you are correct in that you need both M10 and M12 fasteners. However, I don't have the exact length that you need. With that being said, so long as they go all the way through the weld nuts in the frame that…

view full answer...

Answer 2

Putting self-tapping screws into the Curt Trailer Hitch Receiver #C15312 for your 2005 GMC Sierra 2500 won't weaken it but I can't speak to the warranty part. I would think that something that small would be a non-issue unless for…

view full answer...

Answer 3

When installing The etrailer hitch #e98854 onto your 2016 Chrysler Town and Country it uses the existing M10 and M12 bolts that should be present on your vehicle. Since your hardware is missing you will need to contact your vehicle's dealership…

view full answer...

Answer 4

The linked instructions for your Curt Class III Trailer Hitch #13364 indicate the torque specifications for both the included 10mm and 12mm fasteners. These specs are listed as item 4 in the instructions. For reference I have linked you to an…

view full answer...

Answer 5

Thank you for the kind words! There are indeed many hitches that fit both the 2010 and 2015 Dodge Grand Caravans. Both of these models years are part of the same 5th generation of this vehicle. Curt Class III hitch #13364 will fit both model years as…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 9

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 10

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 11

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 12

To add a class III hitch to your 2024 Honda CR-V hybrid, I recommend the Curt Trailer Hitch item #C13397. This hitch is custom fit and bolts to your CR-V with included hardware. It is a class III hitch with a 2" receiver. I really like this…

view full answer...

Size of the Bolts Used to Install a Hitch on a 2015 Dodge Grand Caravan

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching