What Material Are Swagman Bike Rack Cradles Made of

Question

Question:

WHAT ARE THE WHEEL CRADELS MADE OF?

asked by: SUSAN

1

Helpful Expert Reply:

I spoke with my contact at Swagman and he said the cradles on the Swagman Dispatch 2 Bike Platform Rack # S44FR, are made of a heavy duty plastic that have a lifetime warranty.

expert reply by: Chris O

1

Answer 1

Each of the replacement ladders that we carry are universal fits as we don't carry OEM replacement parts, just aftermarket parts. These ladders will work for your 2017 Grand Design Solitude 310GK but will require installation and they can be cut…

view full answer...

Answer 2

The Stromberg Carlson RV Exterior Ladder w/ Hinges, #LA-401, in aluminum finish, measures 99-1/2" tall and 12" wide. Like all of our exterior RV ladders this is sold packaged with ladder supports/stand-offs included.

view full answer...

Answer 3

Thule specifically mentions that the DoubleTrack is not to be used on a towed trailer. The primary reason for this is that a rack installed on a towed trailer will experience much more shaking and jarring than it would if installed on a vehicle. This…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

Hey Dave, so the best option for carrying your carbon frame bike and e-bike is the Swagman Escapee part #S39SR with the ramp #S59SR . It has the capacity for carrying an e-bike, is rated for travel trailer use, only touches the bikes by the tires…

view full answer...

Answer 7

I have a solution for you. Here at Etrailer, we strongly discourage using wheel-mounted bike racks like the Kuat NV 2.0 #NV22B for bikes with fenders. Mounting wheels with fenders can cause the fenders to crack or become damaged, especially with the…

view full answer...

Answer 8

To me it makes the most sense to put a Bike Rack #HLY64FR on the flat towed vehicle rather than above the tow bars. Especially on heavy e-bikes as they are difficult to lift that high onto the rack, but also as it only makes sense to have the rack on…

view full answer...

Answer 9

Class I and Class II hitches both have a 1-1/4 inch receiver opening. The difference is that a Class I hitch has a lower tongue weight rating, usually 200 pounds and a lower towing rating, usually 2,000 pounds. A Class II hitch usually has a tongue…

view full answer...

Answer 10

Yes, you can install a Curt Trailer Hitch Receiver #C11433 on your 2019 Chevrolet Spark. This receiver is capable of supporting up to 200lbs of tongue weight. With each of the Lectric 3.0 e-bikes weighing roughly 60lbs without the battery you will…

view full answer...

Answer 11

As long as the flat tow wiring is wired in before the 4-Way #C93ZV and you connect the power for the converter directly to the battery it will work. I have seen several use Magnetic Lights #TL21RK which they will wire in on the main harness to have…

view full answer...

Answer 12

For an e-bike rack for your Letric XP step thru bikes at the rear of an RV the Swagman E-Spec part #S94FR would be a great choice as it's rated for the rougher ride quality at the rear of RVs, has the higher weight capacity needed at 60 lbs per…

view full answer...