Pin Diameter of SportRack Anti Rattle # SR0901 Hitch Lock

Question

Question:

What is the dia. and thread on this

asked by: Jay

0

Expert Reply:

The SportRack Anti-Rattle Hitch Lock # SR0901 is a 1/2 inch in diameter with coarse threads. This is a manufacturer-specific item that will only work with certain SportRack bike racks.

expert reply by: Mike L

0

Answer 1

The Stainless Steel Locking, Anti-Rattle Threaded Hitch Pin for 2" Trailer Hitches #SR25219 works with most bike racks that have a hollow shank, but since the Yakima OnRamp E-Bike Platform Bike Rack with Ramp - 2" Hitches #Y36FR came with a…

view full answer...

Answer 2

Yakima has a lock, part #Y07235, that is designed to fit the anti-rattle pin that is included with most of their hitch racks. I have linked to the lock below. If you would like to confirm if it will fit, I would need to know which Yakima rack you…

view full answer...

Answer 3

The SumoSprings Trailer Helper Springs part #TSS-107-40 are compatible with practically any trailer that has a 3K to 5K overslung axle or in other words the leaf springs are mounted on top of the axle. If you have an underslung axle in which the leaf…

view full answer...

Answer 4

I took measurements of the Anti-Rattle Hitch Lock for Malone Cargo Carriers #MPG2174 for you and the bolt length is 4-1/4" and diameter is 1/2". Included is a review video for additional information.

view full answer...

Answer 5

The Anti-Rattle Hitch Lock for Kuat Transfer Bike Racks part #HLT comes with a 1/2" diameter bolt/pin. It can be used in both 1-1/4" receiver tubes with a 1/2" hitch pin hole and because it threads into the shank on the bike rack can…

view full answer...

Answer 6

For your Thule Vertex XT you can use pin #TH62RE. This is the pin part only from the Snug-Tite lock you mentioned. This will allow you to have a regular threaded pin and add the lock later if you wanted.

view full answer...

Answer 7

We do not carry the Allen Bike Racks, so I am not able to test to see if the SportRack Anti-Rattle Bike Rack Hitch Lock, part #SR0901 will work on your bike rack. The overall length of the bolt is 4 inches and the threaded portion is 1-3/4 inches.…

view full answer...

Answer 8

Kuat and bike rack manufacturers don't like to give that info out but will if needed. Reason being they don't want people trying to use their locks and hitch pins on bike racks they weren't tested on since that's typically why people…

view full answer...

Answer 9

There's a chance it might, but you would have to try it and see since we don't test the compatibility of the different threaded pins in different racks. The correct threaded pin you would need for a Yakima Bighorn would be the part #Y8890200…

view full answer...

Answer 10

There is a lock that will work for your Hollywood Racks Sport Rider 2-Bike Carrier #HR1000Z-R, although Trailer Hitch Receiver Lock for 1-1/4" Hitches #HE6033 will not work because it is made for Advantage SportsRack bike racks and is threaded…

view full answer...

Answer 11

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Pin Diameter of SportRack Anti Rattle # SR0901 Hitch Lock

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching