Diameter and Section Width of 165/65-8 and 215/60-8 Tires

Question

Question:

Can you provide the dimensions ie width and height for the165/65-8 and the215/60-8 tires Thank You

asked by: John S

0

Expert Reply:

If my math's correct, a 165/65-8 tire like part # AM1HP22 has a section width of 6.6 inches and a diameter of 16.5 inches. A 215/60-8 tire like part # AM1HP28 has a section width of 8.9 inches and a diameter of 18.1 inches.

expert reply by: Mike L

0

Answer 1

The 165/65-8 tire will work just fine in place of a 215/60-8 tire so you should not have any issues so long as you mind the load range ratings. The Loadstar K399 Bias Trailer Tire part #AM1HP22 and Kenda 165/65-8 Bias Trailer Tire with 8"…

view full answer...

Answer 2

There could be a few things that are causing your trailer tires to wear on the inside. It could be that at one time the trailer was overloaded and the axle has been slightly bent down. Another possibility is that the another part of the suspension…

view full answer...

Answer 3

The 205/65-10 and the 20.5 x 8-10 would be very close in size. Assuming that 20.5 is the diameter of the tire and 8 is the width. The Kenda 205/65-10 Bias Trailer Tire with 10 inch White Wheel, #AM3H390, for example, is 8.3 inches wide with a…

view full answer...

Answer 4

The smallest wheel diameter we offer that is for hubs that have a 5 on 4-1/2 inch bolt pattern is 10 inches. The smallest tire size then would be the 205/65-10 that measures 20.5 inches like the part #AM3H490.

view full answer...

Answer 5

Since the braking power is still hydraulic, you should have no issues converting from a vacuum over hydraulic system to an electric over hydraulic system. The electric over hydraulic actuator will take the place of the vacuum that pressurized the…

view full answer...

Answer 6

I have the perfect solution for you! The first thing you need to do is swap out your actuator and for that I recommend using the USA made HydraStar Electric Over Hydraulic Actuator for Drum Brakes #HBA-12 because this company makes very reliable…

view full answer...

Answer 7

I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…

view full answer...

Answer 8

You will need the Red LED Trailer Clearance or Side Marker Light #328-K-52 or Amber LED Trailer Clearance or Side Marker Light #328-K-51 for your 2018 Forest River Sunseeker motorhome. These lenses have the same Top Command SAE-AP2-16 markings on the…

view full answer...

Answer 9

If you are needing the hub and drum assembly then you will want to go with the Dexter Trailer Hub and Drum Assembly #8-201-5UC3-EZ but if you are just looking for an idler hub then you will want part #8-213-5UC1 instead. These come with the correct…

view full answer...

Answer 10

The old version of the #HBA-CAM used 4 wires, but the product was updated awhile back and now uses only two wires as shown in the photo on the product description page. The white wire from the HBA-CAM would tap into the white ground wire and the blue…

view full answer...

Answer 11

On a 2005 Chevy Silverado 1500, If you are facing the front of the truck looking at the power distribution box, there will be a post at the back left side and a fuse slot near it. It is that fuse slot that you will install a 30 amp fuse. I have…

view full answer...

Answer 12

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Diameter and Section Width of 165/65-8 and 215/60-8 Tires

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching