Availability of a Clear LED Trailer Clearance Side Market Light

Question

Question:

I need to see if you still have product code mcl95ab but in a clear lense.

asked by: Justin J

0

Expert Reply:

The closest match we have to the mini rectangular LED trailer clearance trailer side marker light # MCL95AB is the Optronics sealed, LED mini utility light # UCL13C2PG. It's 2-1/2 inches long and 1-1/16 inches wide.

Other potential options to consider:

# MCL13CA2B
# MCL63CAB
# MCL65CAB
# AL91CAB

I included an informative article and several video reviews too.

expert reply by: Chris B

0

Answer 1

Wiring connections for the Electric Over Hydraulic Brake Actuator are as follows. Yellow - Cold side of breakaway switch, The wire that goes hot when a breakaway occurs. Black - Positive connection on breakaway switch, The wire that charges the…

view full answer...

Answer 2

The adapter module itself is not brand or make/model specific. While it would be nice to pair the Dexter Adapter Module #DX35FR with the Dexter DX Series Electric Over Hydraulic Brake Actuator #K71-651, you can also use the HydraStar #HBA-CAM…

view full answer...

Answer 3

When installing guide-ons on your boat trailer, like part #CE27636, you want to make sure that they extend high enough that they are easily visible when you are loading your boat. If you feel comfortable loading your boat with the guide-ons being…

view full answer...

Answer 4

What you need is a converter to take the separate turn and brake light circuits and combine them. You will need converter #RM-732. It will take the separate signals and combine them so on the output side you have a green wire for right turn and brake…

view full answer...

Answer 5

The best way to determine the height needed is to measure from the top of your trailer frame to the top of the sides of your boat. If the 40" Tall Guide-Ons #CE27626 sit right at or slightly above the sides of your boat then the shorter will…

view full answer...

Answer 6

The best solution for your Ford F-150 is to get two of the Durabilt Hammerlock Coupling Link for 1/2" Chain #DU96MR. This style of link is a little difficult to install but it's very secure and is designed specifically for the size of chain…

view full answer...

Answer 7

Yes, because it is a 3-wire light, you can wire the Red Identification Light Bar with White LED Utility Light #OPT88FR to function as rear marker and reverse lights.

view full answer...

Answer 8

The Optronics LED Combination Tail Lights #STL16RB and #STL17RB are the best replacement option for the old Wesbar lights. These have all of the functions you need and then some with brake, tail, turn, side marker, side reflex reflector, rear…

view full answer...

Answer 9

Trailer wiring generally uses 16 gauge wire, part #16-1-1. However, with a long trailer like yours you may want to go with a larger like 14 gauge #DW07550-1 or even 12 gauge #12-1-1. Each size is sold by the foot. You will need to have the lights at…

view full answer...

Answer 10

As a general rule of thumb on a single axle trailer the hanger spacing should be around 3/8" shorter than the spring eye to spring eye measurement of your leaf spring. So for a 23-1/8" long leaf spring like the #e59SR you would want your…

view full answer...

Answer 11

When using the 4-Leaf Double-Eye Spring for 4,000-lb Trailer Axles part #e27SR with the Single-Axle Trailer Hanger Kit for Double-Eye Springs part #APS4 you will need to space the leaf spring hangers 25-3/4" apart.

view full answer...

Answer 12

There isn't an exact angle to go off of when it it comes to shackle straps, but we try to them to sit in a 'W' shape to allow for the suspension to travel without binding up. Depending on the length of the shackle straps the angle can…

view full answer...