What is the Correct Bearing Kit for a Dexter Hub and Drum Assembly 8-219

Question

Question:

I checked the bearing numbers and they seem to match but can you tell me if this is the correct kit for a Dexter 8-219 hub? Thank You

asked by: Craig K

0

Expert Reply:

There are a few different types of 8-219 hubs, some that take a 2-1/4 inch inner diameter seal and some that take a 2-1/8 inch inner diameter.

The bearing kit # BK3-200 you referenced will work with the trailer hub and drum assembly 8-219 as long as the seal diameter is 2-1/4 inches. Check the part numbers on your bearings so you can match them to the correct kit.

If your spindle diameter measures 2-1/8 inches where the seal rides using a digital caliper, the bearing kit you need is # BK3-210. See the diagram I included.

I included a helpful article and video reviews for you too.

expert reply by: Chris B

0

click to enlarge

Answer 1

The hub you have like part #84545BX uses the bearing kit part #BK2-100 for replacement bearings/seal/races. I attached a review video for this bearing kit for you to check out as well.

view full answer...

Answer 2

From previous customers we have determined that the Dexter 8-250 hub bearings are #L68149 and #L44649 which means for a bearing kit you would need #BK2-100. That means for brake assemblies you would need the part #AKEBRK-35R-SA for the right hand…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

view full answer...

Answer 5

You can add larger wheels and tires to a trailer as long as you have enough room for the larger size. The main clearance issues we find when putting larger tires and wheels on a trailer is from the top of the tire to the fender and from the inside…

view full answer...

Answer 6

Good morning, Cliff. As of today (3/27/24) we are expecting the #KE33JR tire/wheel combo to be in stock in about 2 weeks. Hopefully this means we can take our own pictures and put them on the site within maybe about 3-4 weeks from now. What I can…

view full answer...

Answer 7

Hey Medic, so the Kenda ST235/75R15 Radial Off-Road Trailer Tire #KE68JR was designed for off-road traction but it is going to do really well in the wet and snowy conditions. Based on what you are looking for these are going to work well.

view full answer...

Answer 8

Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…

view full answer...

What is the Correct Bearing Kit for a Dexter Hub and Drum Assembly 8-219

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching