Installation Instructions for C56287 Harness for 2015 Volvo V60 CrossCountry

Question

Question:

Looking at your website, I cant seem to find the instructions for the subject wiring harness C56287 for a 2015 Volvo V60 Cross Country. Could you link me to the instructions so that I can evaluate what needs to be done prior to purchasing?

asked by: Kirk

0

Expert Reply:

I attached a link to the installation instructions for the Curt wiring harness part # C56287 that you referenced.

expert reply by: Jameson C

0

Answer 1

We do offer the Curt #C56287 harness for the mid-year model of the 2015 Volvo V60. We do also have trailer hitch receivers for your V60. The link at right will let you see all options, which include both 1-1/4-inch Class II and 2-inch Class III…

view full answer...

Answer 2

Due to the lower fascia design of your 2017 Volvo V60 there isn't a way to install a hitch like the Curt #13266 without trimming the rear fascia. This is very common on newer vehicles like yours. I attached a picture that I took from the install…

view full answer...

Answer 3

Though I cannot speak for the parts that Volvo uses, there is not going to be any reprogramming necessary to install T-One Wiring Harness #118683 on your 2016 Volvo XC90. In fact, you can take a look at the complete installation of this harness in…

view full answer...

Answer 4

Yes, the Draw-Tite Max-Frame trailer hitch receiver #75916 will fit your 2015 Volvo V60 Cross Country. In order to complete the installation, fascia trimming is required and underbody panel will need to be temporarily removed. Great thing is that no…

view full answer...

Answer 5

Starting with the trailer hitch I recommend the Draw-Tite Class III Max Frame Receiver Hitch #75916, which is confirmed to fit the R Design edition of your 2018 Volvo V60, because it is the highest rated unit available for your vehicle. This will…

view full answer...

Answer 6

All of the trailer hitch receiver's we offer for your 2017 Volvo V60 will work on the Cross Country models. I recommend the Draw-Tite Max-Frame Trailer Hitch Receiver #75916 due to its low-profile design that once installed only leaves the…

view full answer...

Answer 7

I strongly recommend running the 12 volt power wire from the Curt Wiring Harness, #C59496, directly to the vehicle battery. The 12 volt accessory circuit was not designed to support the additional load of a trailer wiring harness. A wiring harness…

view full answer...

Answer 8

The hitch I recommend for your 2015 Volvo V60 is the Draw-Tite #75916, because of its 400lb tongue weight and 4,000lbs towing weight. To be able to tow a trailer you will need to run lighting to the trailer from your vehicle, for that I recommend the…

view full answer...

Answer 9

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 10

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Yes, we do. To add a hitch to your 2024 Toyota Grand Highlander, I recommend the Curt Trailer Hitch item #C26VV. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...