What is the Center to Center Distance Between Mounting Holes on Carr Grab Handle 200032

Question

Question:

We are looking for a replacement handle for a 2007 Circle J horse trailer. Can you share the measurement on center for the holes on this handle? Thank you.

asked by: John

0

Expert Reply:

I spoke with my contact at Carr and the center to center distance between the mounting holes on grab handle # CARR200032 is 9-1/4 inches.

expert reply by: Michael H

0

click to enlarge

Answer 1

I do have some great drop down trailer stabilizer jack options but I am not aware of any made from aluminum. Instead, I recommend the Stallion Stabilizer Jacks part #288-01892-2. They will work just fine being bolted to an aluminum frame, just stick…

view full answer...

Answer 2

As you can see by the accompanying photos, the Stallion Stabilizer Jacks #288-01892-2 are very similar to the Atwood 82298 jacks. They are drop leg jacks with 7 inches of drop leg travel, an extended height of 22-1/4 inches, a lift capacity of 650…

view full answer...

Answer 3

The Brophy D-Ring Tie Down Anchor - Bolt-On - 3-1/2" Wide - Surface Mount - 1,600 lbs #SR15-C are steel anchors with a zinc finish. Although the zinc finish will help avoid galvanic corrosion from dissimilar metals, the connection by drilling…

view full answer...

Answer 4

That is a pretty cruel prank someone could pull, and dangerous. You would need to either prevent the handle from being folded towards the door by blocking the path or secure the handle so it sticks out all the time. Since you would need to fold it in…

view full answer...

Answer 5

We offer a direct replacement for your current 45A Parallax/Magnetek 6345 Power Center. The Progressive Dynamics Replacement Converter, part #PD4645V is exactly what you'd need. I've linked to a product description video for the #PD4645V…

view full answer...

Answer 6

Easy Grip Assist Handle #PLR6612-A is actually made of aluminum and not stainless steel, and the aluminum is a much better option because it is resistant to corrosion. Additionally, it does not have a weight rating specifically because of how it…

view full answer...

Answer 7

The Domar Stabilizer Jack, part #TJ01RT, do have a weight capacity of 650 lbs. I spoke with my contact at Domar and they told me that these would be able to handle the 650 lbs at the point they were attached. If you have a lot of weight concentrated…

view full answer...

What is the Center to Center Distance Between Mounting Holes on Carr Grab Handle 200032

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching