Will RoadMaster Second Vehicle Kit # RM-98800 Work with Roadmaster 8800 Add a Brake System

Question

Question:

Will this package also work with the Roadmaster 8800 AddaBrake system? Thank You for your help.

asked by: Paul S

1

Helpful Expert Reply:

Yes, the RoadMaster Second Vehicle Kit # RM-98800 will work just fine with your Add a Brake system. This kit includes a breakaway system.

expert reply by: Adam R

1

Answer 1

The RoadMaster Second Vehicle Kit #RM-98800 will work just fine with your Add a Brake system as the second tow vehicle kit. This kit includes a breakaway system. The second motorhome kit you would need for the RV would be the part #RM-98850.

view full answer...

Answer 2

The Roadmaster Second Vehicle Kit #RM-98800 that you mentioned is meant for use with the Roadmaster #RM-9700. This kit includes a second brake away kit, brake signal wire, diode, and wiring for installation. For the monitor that is mounted in the…

view full answer...

Answer 3

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The part you referenced 127194TB is a double-lip seal with an inner diameter of 1.274-inches and an outer diameter of 1.983-inches. The available seal nearest to those dimensions that we offer is part #RG06-010, which is a double-lip seal sold as a…

view full answer...

Answer 6

A TCM double-lip grease seal number 127194 has an inner diameter of 1.274-inches and an outer diameter of 1.983-inches according to my research. The available grease seal nearest to those dimensions that we offer is part #RG06-010, which is a…

view full answer...

Answer 7

I've never heard of an actual third brake light connector on a camper shell to plug in on a truck and we don't carry any parts to do that. The light generally needs to be hardwired into the truck's brake light circuit. The issue with this…

view full answer...

Answer 8

If the trailer wheels scrubbed (dragged and scrapped the ground instead of rolling) when jack knifed then it could have thrown something out of alignment or damaged something. First, inspect the suspension. Look for any elongated holes where…

view full answer...

Answer 9

The correct replacement master cylinder kit we have for your Demco setup is the part #DM5918 which comes with the lock out replacement.

view full answer...

Answer 10

In regards to the Correct Track Trailer Alignment and Lift Kit part #RR23QX, the kit provides a lift by essentially extending the hangers. This normally requires cutting off the old hangers and welding on new, taller ones but with this kit you…

view full answer...

Answer 11

The Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX does come with all of the components needed to lift a tandem axle trailer. The center hangers of a tandem axle setup use different components than the front and rear hangers since…

view full answer...

Answer 12

The Correct Track Trailer Alignment and Lift Kit part #RR23QX offers a 1-1/4" or 2-1/4"lift so if the hitch height height is lower than the vehicle hitch height you can use this kit to bring the trailer level with the vehicle and eliminate…

view full answer...

Will RoadMaster Second Vehicle Kit # RM-98800 Work with Roadmaster 8800 Add a Brake System

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching