bing tracking image
Q & A Icon

5th Wheel Trailer hitch for 2014 Dodge Ram with 5-1/2 Foot Bed  

Question:

what are part numbers for a 5th whl hitch for 2014 dodge ram 1500 4x4x crew cab short bed? Also as stated below the difference for sidewindwinder assy.

0

Expert Reply:

On beds shorter than 6 feet you will need a fixed hitch and a Sidewinder on the trailer to be able to make tight turns.

For a 5th wheel trailer hitch installation kit you can use kit # RP30035-386. For a hitch, if 16,000 pounds is enough for the trailer I recommend the Reese # RP30047. It has a 4-Way pivoting head and dual jaws for a secure connection.

For a 20K version use # RP30928.

A Sidewinder adds an additional 22 inches of clearance and will allow you to make tight turns. I have included a link to the Sidewinder FAQ article for you.

To determine if you will have enough clearance, even with a Sidewinder, there are some measurements you will need to take. Once installed the center of the hitch jaws will be 1-1/2 inches forward of the center of the rear axle. Measure from that point forward to the back of the truck cab. To that, add 22 inches. This measurement must be at least 4 inches MORE than half the width of the trailer overhang to safely make 90 degree turns.

If you determine that you will have enough clearance then the next step is to determine if there is a Sidewinder that will fit your trailer. You will need to know the pin box manufacturer and model number. This information is normally found on a sticker or plate on the pin box. Then compare that information to the Sidewinder FAQ article I have linked to determine if there is a fit.

expert reply by:
0
Chris O

Products Referenced in This Question



Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>