Adding a 7-Way Trailer Connector to 2010 Jeep Wrangler Unlimited without Factory Tow Package
Question:
I have a 2010 Jeep Wrangler Unlimited and am adding towing. I have already purchased a Curt hitch from you and need to add a 7 pin wiring harness with a charge wire. Which one do you recommend?
asked by: Steve
Expert Reply:
I have everything you need to install a 7-way trailer connector on your 2010 Jeep Wrangler Unlimited without the factory tow package. You will first need to install a 4-flat trailer connector. For this, I recommend the Tow Ready T-One Wire Harness, # 118416. This is a plug-in style harness that plugs into the connectors behind the driver's side tail light. I have attached the installation instructions and an installation video for you to check out.
Next, you will want to add a 4-way to 7-way adapter. For this, I recommend using our Universal 4-way and 7-way Install Kit, # ETBC7. This kit comes with all of the necessary wiring and hardware to install a 7-way trailer connector. It also comes with all of the wiring necessary to install a brake controller. I have attached an installation video of this kit for you to check out as well.
Products Referenced in This Question
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- No Converter
- Custom Fit
- 4 Flat
- Tekonsha
more information >
Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Accessories and Parts
- Trailer Brake Controller
- Installation Kits
- etrailer
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 350 lbs TW
- 3500 lbs GTW
- 4000 lbs WD GTW
- 2 Inch Hitch
- 400 lbs WD TW
- No Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Brake Controller
- Shop: Trailer Wiring
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket, Chrysler/Dodge OEM Plug Adapter
- Shop: Blue Ox TrackPro Weight Distribution w/ Sway Control - 7-Hole Shank - 6K GTW, 600 lbs TW
- Video: Draw-Tite I-Command Trailer Brake Controller Installation - 2010 Jeep Wrangler Unlimited
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Shop: T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Shop: 7-Way RV to 4-Way Flat Trailer Connector Adapter
- Video: Rear View Safety Inc Backup Cameras and Alarms - Trailer Camera Systems - RVS-770614-213 Review
- Search Results: towing camera
- Search Results: sway hitch
- Shop: Rear View Safety Wireless Hitch Camera
- Shop: Tire Chains
- Search Results: 7 way
- Article: Determining Trailer Tongue Weight
- Video: Hopkins Leveling Blocks - - HM08200 Review
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Review
- Video: Tekonsha Prodigy P3 Trailer Brake Controller Installation - 2022 Jeep Wagoneer
- Q&A: Parts Needed to Install Prodigy P3 Brake Controller in 2016 Jeep Wrangler with 7-Way
- Search Results: heat shrink
- Video: Trailer Brake Controller Installation - 2017 Jeep Wrangler Unlimited
- Q&A: Weight Distribution Hitch for 24-Foot Enclosed Trailer with Limited Frame Clearance
- Q&A: Is There Difference Between 2 inch and 2-5/16 inch Ball
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Shop: Vehicle Tow Bar Wiring
- Q&A: How to Determine if 2013 Jeep Wrangler has Factory Tow Package and Adding 7-Way and Brake Controller
- Shop: Roof Rack
- Shop: Vehicle Cargo Control
on Trailer Hitch
