Hopkins Leveling Blocks - - HM08200 Review Video

Yes, the width of the ball mount platform of the Curt ball mount #C45340 is 3 inches.

I believe you have Roadmaster baseplates like #RM-521453-5 instead since the Curt baseplate that's confirmed to fit your 2020 Jeep Wrangler is a different style than what you have pictured. You best bet to confirm would be to remove the…

The single leaf #e46SR is designed for use with a mobile home axle, which is intended to be a one-time use item, so I'd wholeheartedly recommend going with the other option, part #e34SR which is designed for use on a trailer that's designed…

A 3,500 lb Dexter axle will have a 2-3/8 inch diameter. The Dexter Trailer Springs Over-Under Conversion Kit #K71-385-00 is designed to work on this axle diameter so it should work just fine to give you additional lift on your trailer for larger…

Wheel torque specs vary based on stud diameter, wheel diameter and wheel material. The linked chart shows you commonly recommended torque specs for a range of studs and wheels. For 1/2-inch wheel studs and a 14-inch steel trailer wheel you will use a…

The over under kit part #K71-384-00 that you referenced is for a single axle so if you had a tandem axle setup you'd need to order a quantity of two.

I spoke with my contact at Super Springs and the SumoSprings Custom Helper Springs, #SSR-204-40, will fit on your 2003 GMC Yukon XL with coil springs as long as it is a 1500 model. These springs are designed to replace your factory bump stops. Once…

There are large RVs, over 40 foot Winnebagos as an example, that only use up to a 4K generator. It seems like a generator is what you need for the power the items you want to have in the trailer. We currently do not have generators or inverters that…

My recommended first step for you to take is to determine what tire size you would need. If you check the plate on the trailer frame near the coupler there will the VIN, axle capacities, as well as the trailer tire size and Load Range recommended.…

I have everything you need to install a 7-way trailer connector on your 2010 Jeep Wrangler Unlimited without the factory tow package. You will first need to install a 4-flat trailer connector. For this, I recommend the Tow Ready T-One Wire Harness,…

There are a few different 50 amp style connectors. The ones for RV applications use the 240 volt twist lock style of 50 amp outlet (NEMA L6-50) a lot which has three prongs whereas the 120 volt style of 50 amp connector you are thinking of that has 4…

While I can sympathize with your issue, it is not safe to tow a trailer if you only have a 2" hitch ball and your trailer coupler is designed for a 2-5/16" hitch ball, even for a short distance; the insecure connection between hitch ball…