Brake Controller and Installation Port for a 2011 Ford E-450

Question

Question:

looking for the lug in for electric brake- where is it located on my 2011 e-450 super duty ford class c-

asked by: Dennis S

0

Expert Reply:

To see where the brake controller port is on your 2011 Ford E-450 motorhome check out the picture I attached. The plug will be behind the door that is pointed out using the screwdriver in the picture.

The # 3034-P harness you referenced is the correct harness to use.

For a brake controller I would recommend the Prodigy P2 Brake Controller part # 90885. This is our best selling brake controller because of how well it works and how easy it is to setup.

expert reply by: Jameson C

0

click to enlarge

Answer 1

If you're looking for a brake controller that is extremely easy to install on your RV on the 2018 Ford E-450 chassis, look no further than the Curt Echo #C51180. This simply plugs into a 7-Way that has trailer lights and 12V power functions,…

view full answer...

Answer 2

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 3

The brake controller I recommend for your 2018 E-450 is the Prodigy P3, part #90195. This is one of our most popular because it is easy to install and operate. You will also need a plug-in adapter, part #3034-P. This will plug into the harness on…

view full answer...

Answer 4

It sounds like you are looking for a performance tuner, and to get the benefits you are looking on your 2002 Ford F-250 with a 6.8L V10 engine I recommend checking out the Edge EvoHT2 Hand-Held Performance Tuner #EP16040 or, if you live in…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 9

You do have the option to utilize the air brakes on your 2023 Freightliner Cascadia to control electric trailer brakes using the Hayes Air Actuated Trailer Brake Controller, part #HA100400C. However, we mostly recommend just using an electric brake…

view full answer...

Answer 10

There are a number of factors involved when converting a semi 7-way to an RV 7-way. Semis generally use a 7-pin round pin socket, similar to #PK11720. And RV style 7-way uses blades, like #PK12706. We do not offer any pre-made adapters to make this…

view full answer...

Answer 11

On a 7 pin round which is the common connection on a semi trailer, the clearance/marker lights are at the 10 o clock position when you look at the trailer wiring connection. When looking at the connector on the back of the truck, that will put the…

view full answer...

Answer 12

Either way is correct. It depends on if you want to keep the semi-style 7-Way (if you need to tow that type of trailer) or if you will never be towing a semi-trailer. If you need to keep the 7-Way semi active on the truck, then you would need to make…

view full answer...

Brake Controller and Installation Port for a 2011 Ford E-450

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching