Does Curt Trailer Hitch Receiver 11366 fit 2013 Lexus GS350 F-Sport AWD

Question

Question:

Does the Curt # C11366 fit the AWD F-Sport 2013 GS350 or is it for RWD only? Thanks

asked by: SurjitS

0

Expert Reply:

According to Curt their # C11366 fits all models of the 2013 Lexus GS350, including the F-Sport model with AWD.

If you'll be using the hitch for light duty towing, you might also need the following to complete your towing system:

Trailer wiring harness w/ 4-pole trailer connector, part # C59236
Ball mount, part # 36071
Trailer ball, part # 19258 for a 2 inch ball, or # 19256 for a 1-7/8 inch ball
Locking hitch pin, part # e98879

expert reply by: Mike L

0

Answer 1

Yes, I confirmed with Curt that the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11366 does in fact fit your 2019 Lexus GS 350 F Sport. They were also able to tell me that it will not interfere with the sensors on the rear of…

view full answer...

Answer 2

We do not have any hitches to fit the 2015 Lexus GS 350 F-Sport. This trim level would require so much modification that hitch makers determined customers would not accept the result. Curt Class I hitch #C11366, the only option for the car, is…

view full answer...

Answer 3

Curt trailer hitch #C11366 will fit your 2014 Lexus GS 350 all-wheel drive. If you want to use the hitch for an accessory such as a bike rack or cargo carrier then you have to make sure the accessory is rated for use with a Class I trailer hitch.…

view full answer...

Answer 4

The Draw-Tite Class II trailer hitch #36535 has been discontinued but is a fit for your 2013 Lexus GS 350. The only current fit we have is the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C11366 so that is what I recommend for…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

Hey Jay. It sounds like you are on the right track here because a sidewinder pin box will be your only option for pulling your 5th wheel since you have a short bed truck with the Rambox. That said, you are right that the Reese Sidewinder cannot be…

view full answer...

Answer 8

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 9

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 10

Hey John, Thanks for the purchases and you have everything you need except the wedge. I verified directly with Reese that the correct wedge to use with the Demco Recon 5th Wheel Trailer Hitch #DM8550043 and Reese Sidewinder #RP34FR is the following:…

view full answer...