Will Demco Adjustable Clevis Work With Curt Replacement Shank  

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

I had the Demco 2-Tang Clevis - Adjustable Channel Mount #DM05593-97 measured and from end to end, it will be 9 1/4 inches long.

The mounting holes are 2 inches on center for the clevis and 3 inches on center for the mount. The clevis and side of the bracket has holes that are 0.64 inch. The top and bottom holes of the mounting bracket are 0.48 inches and the center hole is…

I spoke with my contact over at Demco about clevis #DM05593-97. The squares at the back are 1.88 inches square. And the space between the upper and lower tangs is 2 inches. I have included a picture showing these measurements for you.

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

That is a pretty good guess! The two position mounting channel in the #T1812200 is 3-1/2" wide x 7-1/2" tall as shown in the included diagram. I included a video review of the #T1812200 for you to take a look at.

The diameter of the mounting holes of the #T0897900 are 5/8 inch. We also have this as a kit with the channel and mounting bolts/nuts with part #T1812200.

There sure is! The correct locking pins for the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4" Drop - 6,000 lbs #C45901 is the Curt Lock Set #C23556. This set includes one lock to lock the ball mount section to the channel,…

I have a solution for you but there is no way to purchase just the ball mount portion of the Curt Channel Style Adjustable Ballmount - 5-1/4" Rise, 6-3/4" Drop - 6,000 lbs item #C45901. You can however use the Replacement 2" and…

Yes, the RockerBall and channel style ball mount you asked about are absolutely compatible: - Curt RockerBall Shock Absorbing 2" Hitch Ball #C40047 - Curt Channel Style Adjustable Ball Mount #C45901 The reason is, the ball mount accepts a hitch…

The Replacement 10K Ball Mount Tongue for Brophy Adjustable Drop Hitch #RTB1 will not fit the Curt Weight Distribution Shank for 2-1/2" Hitches #C17131 as #RTB1 only fits Brophy Shanks. Instead, what will work with the Curt WD Shank #C17131 is…

The distance between the mounting holes of the #RTB1 is 2 inches. The diameter is 5/8 inch.