Smallest Diameter Rim the Trailer Hub & Drum Assembly # 8-173-16UC3 will Fit

Question

Question:

can a 8inch rim wheel fit on hub 8-173-16uc3

asked by: Paul M

1

Helpful Expert Reply:

The smallest diameter rim the Trailer Hub & Drum Assembly # 8-173-16UC3 is compatible with is a 10 inch rim. It would not work with an 8 inch rim.

expert reply by: Jameson C

1

Answer 1

The Curt Spectrum Trailer Brake Controller - 1 to 4 Axles - Proportional - Dash Mount #c51170 will flash blue on its control knob when the brakes are applied with no trailer or when it senses the trailer has been disconnected. If you look at the…

view full answer...

Answer 2

A 2,000 lb trailer axle like the Dexter Trailer Axle Beam part #T20BTR-7258 is not going to come equipped from the manufacturer with a brake mounting flange because of the weight of the trailer it is designed to be used on. However, most qualified…

view full answer...

Answer 3

The Curt Spectrum Trailer Brake Controller part #C51170 will illuminate even without a trailer connected that is correct. If you don't wish to see this light each time you hitch the brakes without a trailer attached then you will either need to…

view full answer...

Answer 4

In order to find a replacement axle for your Harbor Freight trailer you will need to take some measurements to determine the correct axle length. The most important measurement is the distance from hub face to hub face. Additionally, you can measure…

view full answer...

Answer 5

To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel…

view full answer...

Answer 6

What you could do is use an axleless system #A35RS545E which comes with everything except a brake controller. The only issue is that you would need to also replace the tires and wheels with something like #TA73RR since the kit has a 5 bolt pattern…

view full answer...

Answer 7

The best option we have for you is the 3-Leaf Double-Eye Spring part #e84SR with the Single-Axle Trailer Hanger Kit part #APS4. This option will replace the leaf springs and leaf spring hanger brackets which is needed because the new double eye leaf…

view full answer...

Answer 8

I went out to our warehouse and got the following dimensions for the Stabilizer Jacks #TJ01RT-HD in the stowed position. I have included an image below so you can see the points I measured from. The overall length is 12-3/8" long, 4-3/8"…

view full answer...

Answer 9

When measuring for bolt pattern on an even bolt pattern you would measure from the center of one hole to the center of the hole diagonally across from it. In your picture you started measuring at the 1 inch mark. So if the adjacent measurement is…

view full answer...

Answer 10

I really wish there was a way to determine what bearings a trailer needed without actually pulling the wheel off and checking, but there isn't. The only two solutions I have for you would be to remove the hubs and get the numbers that are stamped…

view full answer...

Answer 11

Neither of those Harbor Freight trailers has brake mounting flanges on the spindles. To add electric brakes you would have to have brake mounting flanges welded on. This is a precision job that requires a special jig and someone with experience in…

view full answer...

Answer 12

To determine if the SportRack Vista XL Cargo Box - Roof Mount - 18 cu ft - Black Item #SR7018 will fit your 2017 Hyundai Santa Fe there are a couple of things to look at on the vehicle. First, check the spacing of the roof rack crossbars. It they are…

view full answer...

Smallest Diameter Rim the Trailer Hub & Drum Assembly # 8-173-16UC3 will Fit

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching